Airtac SE32 Standard Cylinder SE32BX50SN
The AirTAC Airtac SE32 Standard Cylinder SE32BX50SN is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 50mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke50 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32BX50SN
The AirTAC SE32BX50SN is a double-acting, single-rod ISO 15552 profile cylinder engineered for pneumatic automation. It features a 32mm bore and 50mm stroke, generating 402N of push force at 0.5 MPa. The extruded aluminum barrel design omits external tie rods, yielding a smooth, compact profile that resists corrosion and mounts flush against machine frames.
Equipped with a SUS304 stainless steel rod and an NBR seal, this unit is specifically built for corrosive or washdown environments. The integrated magnet enables position sensing via CMSE reed or DMSE electronic switches, while field-adjustable air cushioning at both ends allows precise deceleration of moving loads near the stroke limits.
Airtac SE32 Standard Cylinder SE32BX50SN Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32BX50SN |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32BX50SN
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32BX50SN Is Used
Bottling Line Diverters
Steering plastic bottles between filling lanes is effortless with the 402N push force and 50mm stroke, while the SUS304 rod shrugs off splash exposure.
Carton Sealing Jaws
Cycling at up to 800 mm/s, this cylinder actuates light sealing jaws, and the DMSE electronic sensors track the precise end-of-stroke position for reliable glue application.
Lab Sample Handling
Moving test tubes between processing stations benefits from the compact tie-rod-free profile and NBR seals that tolerate routine chemical wipe-downs.
Is the Airtac SE32 Standard Cylinder SE32BX50SN the Right Cylinder?
Generating 402N of push at 0.5 MPa, this 32mm bore cylinder fits light-duty tasks. If your application requires less force, there is no smaller standard ISO 15552 bore in this series. If you need more power, stepping up to the 40mm bore provides 628N of push at 0.5 MPa. Keep in mind that a standard SE cylinder will drift and cannot hold a load if air pressure is lost; for position holding without live pressure, consider the BSE rod lock variant. Because this model carries a PT1/8 port and basic mounting, ensure your manifold and hardware match the ISO 15552 interface for a seamless retrofit.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32BX50SN FAQ
At 0.5 MPa, this 32mm bore cylinder provides 402N of push force and 345N of pull force. At 0.7 MPa, the push force reaches 563N. The absolute maximum push force is 82 kgf at 1.0 MPa.
Yes, the SE32BX50SN is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact same mounting footprint and center distances as other standard profile cylinders, ensuring a straightforward retrofit.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32BX50SN
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.