Airtac SE32 Standard Cylinder SE32BX600H
The AirTAC Airtac SE32 Standard Cylinder SE32BX600H is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 600mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke600 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32BX600H
The AirTAC SE32BX600H is a double-acting single-rod ISO 15552 profile cylinder engineered for demanding environments. It features a 32mm bore and a 600mm stroke, generating 402N of push force and 345N of pull force at 0.5 MPa. This specific configuration pairs a SUS304 stainless steel rod with a high-temperature FKM seal, extending the operating range from -20 to +150 C for corrosive or washdown duties.
The extruded aluminum barrel lacks external tie rods, yielding a compact, corrosion-resistant profile that mounts flush while exposing sensor grooves on three sides. Because this SKU omits the -S magnet, it does not support CMSE or DMSE position sensing out of the box. Field-adjustable pneumatic cushioning at both ends allows you to tune end-stop deceleration for the 600mm travel, ensuring smooth stops rather than harsh bumper impacts.
Airtac SE32 Standard Cylinder SE32BX600H Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32BX600H |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32BX600H
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32BX600H Is Used
Medical Sterilizer Door
The FKM seal and SUS304 rod withstand 150 C steam sterilization cycles, while the 402N push force reliably actuates heavy chamber doors over the 600mm travel.
Food Washdown Ejector
SUS304 rod material resists daily chemical washdowns in packaging lines, providing 345N pull force to retract a product ejector arm precisely.
High-Temp Stamping Feed
Operating safely up to 150 C near industrial ovens, this cylinder pushes light metal blanks into a forming station with 563N of force at 0.7 MPa.
Is the Airtac SE32 Standard Cylinder SE32BX600H the Right Cylinder?
At 0.5 MPa, this 32mm bore yields 402N of push force. If your application requires less power, you cannot step down within the SE series as 32mm is the smallest bore, but if you need substantially more thrust, stepping up to the 40mm bore provides 628N of push at 0.5 MPa. Keep in mind that a plain SE cylinder will drift and cannot hold a load if air pressure is lost or the valve is centered; for position holding, consider a BSE rod lock variant.
With a 600mm stroke on a 12mm rod, the unsupported length increases the risk of rod-bearing bending under side loads; an external guide is strongly recommended to prevent premature wear. This cylinder is dimensionally interchangeable per ISO 15552, allowing a drop-in replacement for other ISO 15552 cylinders using the standard PT1/8 port and standardized mounting hardware.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32BX600H FAQ
The SE32BX600H provides a push force of 402N and a pull force of 345N at 0.5 MPa. At 0.7 MPa, the push force is 563N, with a maximum push of 82 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
No, the adjustable air cushion at both ends only decelerates the piston near the stroke end; it is not a locking mechanism. If air is lost or the valve is centered, the load will drift. For position holding, you need a BSE rod lock cylinder or an external pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32BX600H
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.