Airtac SE32 Standard Cylinder SE32BX600S
The AirTAC Airtac SE32 Standard Cylinder SE32BX600S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 600mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke600 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32BX600S
The AirTAC SE32BX600S is a double-acting single-rod profile cylinder built to ISO 15552 dimensions, delivering a 402 N push at 0.5 MPa. Its square extruded aluminum barrel omits external tie rods, yielding a compact footprint that mounts flush against machine frames while resisting corrosion.
This specific configuration pairs a SUS304 stainless steel rod for washdown and corrosive-duty environments with a built-in position magnet for CMSE or DMSE sensors. The 600 mm stroke operates at 30-800 mm/s, relying on field-adjustable air cushioning at both ends to decelerate the piston smoothly near stroke end.
Airtac SE32 Standard Cylinder SE32BX600S Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32BX600S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32BX600S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32BX600S Is Used
Bottling Line Diverter
Uses the 600 mm stroke and SUS304 rod to push plastic containers between parallel conveyor lanes in a washdown beverage facility.
Film Roll Transfer
Extends fully to shift lightweight packaging film rolls horizontally into a sealing station, utilizing the 402 N push force.
Lab Sample Ejection
Ejects processed sample trays from a chemical analyzer, relying on the stainless steel rod to resist corrosive vapor exposure.
Is the Airtac SE32 Standard Cylinder SE32BX600S the Right Cylinder?
This 32 mm bore generates 402 N push at 0.5 MPa, sitting at the smallest standard size. If your application requires less force, there is no smaller ISO 15552 bore in this series, but stepping up to the 40 mm bore yields a 628 N push for heavier loads. Because the 600 mm stroke is substantial for a Ø12 mm rod, an external guide is strongly recommended to prevent rod-bearing bending under side loads.
As a drop-in replacement for any ISO 15552 cylinder, it shares standard mounting accessories and a PT1/8 port. Remember that the adjustable air cushion only decelerates the piston near stroke end; it is not a locking device. If the load must be held mechanically without live air pressure, integrate a BSE rod lock or an external pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32BX600S FAQ
At 0.5 MPa it provides 402 N push and 345 N pull. At 0.7 MPa the push is 563 N, with a maximum push of 82 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE32BX600S is dimensionally interchangeable per ISO 15552 / VDMA 24562 standards. You can drop it into existing foot, flange, or trunnion mounts using the standard PT1/8 port and M10x1.25 rod thread without altering the machine footprint.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32BX600S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.