Airtac SE32 Standard Cylinder SE32BX600SN
The AirTAC SE32 Standard Cylinder SE32BX600SN is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 600mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke600 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE32 Standard Cylinder SE32BX600SN
The AirTAC SE32BX600SN is a double-acting, single-rod ISO 15552 profile cylinder engineered for a 600 mm stroke. It features a 32 mm bore that generates 402 N of push force and 345 N of pull force at 0.5 MPa. The square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush within tight machine envelopes.
This specific configuration incorporates a SUS304 stainless steel rod (code B) paired with an NBR seal, making it highly suitable for washdown or corrosive manufacturing settings. It includes a built-in magnet (-S) for position tracking via CMSE reed or DMSE electronic sensors. Field-adjustable pneumatic cushioning at both ends allows you to tune end-of-stroke deceleration, protecting tooling during high-speed 30-800 mm/s cycles.
Airtac SE32 Standard Cylinder SE32BX600SN Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32BX600SN |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32BX600SN
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32BX600SN Is Used
Lab Diagnostic Conveyor Diversion
Utilizes the 402 N push force and SUS304 rod to reliably divert small specimen tubes on a washdown-compatible belt, tracking position via the DMSE electronic sensor.
Flow Wrapper End-Seal Head
Drives a lightweight sealing jaw over 600 mm stroke, using the field-adjustable air cushion to soften end-stops and prevent packaging film tearing during high-speed cycles.
PCB Panel Push-off Station
Ejects populated printed circuit boards from a test fixture, relying on the compact tie-rod-free extruded profile to maximize space within dense routing machinery.
Is the Airtac SE32 Standard Cylinder SE32BX600SN the Right Cylinder?
The 32 mm bore offers 402 N push at 0.5 MPa. If your application requires less force, you must drop down to a smaller non-standard bore, but if you need to step up, the 40 mm bore provides 628 N push at 0.5 MPa. Because this is a plain double-acting cylinder, it will drift and cannot hold a load if air pressure is lost or the valve is centered; for static holding, integrate a BSE rod lock or an external pilot-operated check valve.
At 600 mm of stroke, the 12 mm rod and rod bearing face an elevated risk of bending under side loads. To prevent premature wear, guide the load externally rather than relying solely on the piston rod. This unit is dimensionally interchangeable per ISO 15552, meaning it serves as a direct replacement for other ISO 15552 profile cylinders using the standard PT1/8 port and basic mounting interface.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32BX600SN FAQ
At 0.5 MPa, this 32 mm bore cylinder provides 402 N of push force and 345 N of pull force. At 0.7 MPa, the push force is 563 N. The maximum push force is 82 kgf at 1.0 MPa, and the operational speed range is 30-800 mm/s.
Yes, the SE32BX600SN is dimensionally interchangeable per ISO 15552 and VDMA 24562 standards. You can use it as a direct replacement for other ISO 15552 profile cylinders, matching the 32 mm bore, 600 mm stroke, and PT1/8 port size.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32BX600SN
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.