Airtac SE32 Standard Cylinder SE32BX80SH
The AirTAC Airtac SE32 Standard Cylinder SE32BX80SH is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 80mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke80 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32BX80SH
The AirTAC SE32BX80SH is a double-acting single-rod profile cylinder built to the ISO 15552 / VDMA 24562 standard, featuring a 32 mm bore and an 80 mm stroke. It generates 402 N of push force and 345 N of pull force at 0.5 MPa. Equipped with a SUS304 stainless steel rod and a Viton (FKM) seal, this variant is engineered for corrosive or washdown environments and withstands operating temperatures up to 150 °C.
The extruded aluminum barrel lacks external tie rods, yielding a compact, flush-mounting profile that resists corrosion and simplifies sensor placement along three integrated grooves. A built-in magnet enables position detection via AirTAC CMSE (reed) or DMSE (electronic) switches, while the field-adjustable pneumatic cushioning at both ends allows you to fine-tune end-of-stroke deceleration for demanding cyclic operations.
Airtac SE32 Standard Cylinder SE32BX80SH Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32BX80SH |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32BX80SH
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32BX80SH Is Used
Medical Washdown Ejector
Ideal for medical device test fixtures requiring 402 N push at 0.5 MPa, where the SUS304 rod and Viton seal withstand harsh chemical washdowns at elevated temperatures.
Food Grade Flap Diverting
Actuates stainless steel flap gates on packaging lines, using the 80 mm stroke and FKM seal to survive high-temperature clean-in-place processes without degrading.
Small Part Clamping Fixture
Secures composite or plastic parts during CNC trimming, relying on the 27 mm cushion length to soften hard end-stops and protect delicate workpieces from impact.
Is the Airtac SE32 Standard Cylinder SE32BX80SH the Right Cylinder?
This 32 mm bore provides 402 N push at 0.5 MPa. If your application requires less force, you lack a smaller ISO 15552 neighbor in the AirTAC range, so this is the starting point. If you need more power, stepping up to the 40 mm bore yields 628 N of push force at 0.5 MPa. Keep in mind that a standard SE cylinder does not hold its load when air is exhausted or the valve is centered; the piston will drift. For position holding without live pressure, consider the BSE rod lock variant. Because this is a dimensionally interchangeable ISO 15552 cylinder, it serves as a drop-in replacement for other ISO 15552 profile cylinders, utilizing standard mounting hardware and PT1/8 ports.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32BX80SH FAQ
At 0.5 MPa, this 32 mm bore cylinder provides 402 N of push force and 345 N of pull force. At 0.7 MPa, the push force is 563 N, with a maximum push force of 82 kgf at 1.0 MPa. Thanks to the Viton (FKM) seal, it operates from -20 to +150 °C, and its speed ranges from 30-800 mm/s.
No, the standard SE cylinder does not hold its position or load when air is lost or the valve is centered; the piston will drift. The adjustable air cushion at both ends only decelerates the piston near the stroke end and is not a locking mechanism. If your application requires true load holding, you need the BSE rod lock variant or an external pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32BX80SH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.