Airtac SE32 Standard Cylinder SE32X100SN
The AirTAC Airtac SE32 Standard Cylinder SE32X100SN is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 100mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke100 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X100SN
The AirTAC SE32X100SN is a double-acting, single-rod ISO 15552 profile cylinder engineered for compact pneumatics. It generates 402 N of push force at 0.5 MPa and utilizes a 100 mm stroke, making it well-suited for lower-force automation tasks.
Built with an extruded aluminum barrel that eliminates external tie rods, this unit resists corrosion and mounts flush against machine frames. The integrated -S magnet enables position tracking via CMSE reed or DMSE electronic sensors, while the NBR seal handles standard operating temperatures up to 70 C. Field-adjustable pneumatic cushioning at both ends allows you to fine-tune end-of-stroke deceleration, protecting tooling from hard mechanical impacts.
Airtac SE32 Standard Cylinder SE32X100SN Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X100SN |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X100SN
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X100SN Is Used
PCB Component Insertion
Provides 402 N of precise push force over 100 mm to seat electronic connectors onto printed circuit boards without damaging delicate substrates.
Small Carton Flap Folding
Drives lightweight tucking arms on packaging lines, utilizing the 32 mm bore and adjustable end cushions to prevent slamming at high cycle rates.
Lab Sample Dispensing
Actuates fluid dispensing valves where the built-in magnet triggers DMSE electronic sensors for exact 100 mm stroke positioning.
Is the Airtac SE32 Standard Cylinder SE32X100SN the Right Cylinder?
If 402 N of push at 0.5 MPa is too much for your fixture, stepping down requires a custom smaller bore outside this ISO 15552 family. Conversely, if you need more force, the next size up is the 40 mm bore, which provides 628 N of push at 0.5 MPa. Because this is a double-acting cylinder, it will not hold a load if air pressure drops or the valve centers; the piston will drift. For strict position-holding safety, consider an AirTAC BSE rod lock variant. To replace an existing unit, match the 32 mm bore, 100 mm stroke, PT1/8 port, and mounting accessory. The integrated magnet works seamlessly with CMSE and DMSE switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X100SN FAQ
At 0.5 MPa, it provides 402 N of push force and 345 N of pull force. At 0.7 MPa, the push force is 563 N. The maximum push force is 82 kgf at 1.0 MPa.
Yes, the SE32X100SN is dimensionally interchangeable per ISO 15552 standards. You can drop it in as a replacement for other ISO 15552 profile cylinders using the same 32 mm bore, 100 mm stroke, and PT1/8 porting.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X100SN
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.