Airtac SE32 Standard Cylinder SE32X1050S
The AirTAC Airtac SE32 Standard Cylinder SE32X1050S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 1050mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke1050 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X1050S
The AirTAC SE32X1050S is a double-acting single-rod ISO 15552 profile cylinder engineered for precise linear motion. It features a square extruded aluminum barrel without external tie rods, yielding a compact footprint that mounts flush against machine frames while resisting corrosion. Equipped with a built-in magnet (-S), it supports CMSE reed and DMSE electronic position sensors for exact mid-stroke detection. Delivering 402 N of push force at 0.5 MPa, this unit is tailored for lighter-duty cycling.
Because the 1050 mm stroke exceeds the standard 1000 mm maximum for this bore, it is manufactured as a made-to-order unit. It retains the core ISO 15552 / VDMA 24562 dimensional interface, allowing seamless integration with standardized mounting hardware. The field-adjustable air cushion at both ends can be tuned via a setscrew to soften end-of-stroke impacts, ensuring smooth deceleration even at extended lengths.
Airtac SE32 Standard Cylinder SE32X1050S Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X1050S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 1050 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X1050S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×1050 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X1050S Is Used
Long-Stroke Ejection
Ejecting light molded parts from a 1000 mm deep plastics press using the 402 N push force, where the long travel ensures parts clear the tooling entirely.
Transfer Pusher
Transferring small cardboard cartons across a wide packaging belt, relying on the CMSE sensor magnet to confirm the full 1050 mm retraction stroke before the conveyor advances.
Sample Handling
Moving light test tubes or vials into an inspection chamber within laboratory automation, benefiting from the smooth flush-mounted profile barrel that resists fluid contamination.
Is the Airtac SE32 Standard Cylinder SE32X1050S the Right Cylinder?
Stepping down to a bore size of 32 mm is already the smallest available, so if less force is required, you must look outside the SE range or utilize mechanical advantage. If higher thrust is needed, moving up to the 40 mm bore increases your 0.5 MPa push force to 628 N. Keep in mind that a plain SE cylinder will drift if air pressure is lost or the valve is centered; it cannot hold a load vertically without live pressure. For holding loads safely without air, consider the BSE rod lock variant or an external pilot-operated check valve.
At 1050 mm, the unsupported piston rod is highly susceptible to bending under side loads. Utilizing an external guide rail is strongly recommended to prevent rod-bearing wear and premature seal failure. This non-standard stroke is built to order, ensuring you receive the exact travel distance required for your specific machine layout.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X1050S FAQ
The SE32X1050S provides a push force of 402 N and a pull force of 345 N at 0.5 MPa. At 0.7 MPa, the push force is 563 N. The maximum push force is 82 kgf when operating at the maximum pressure of 1.0 MPa.
Yes, the SE32X1050S is dimensionally interchangeable per ISO 15552 standards, serving as a drop-in replacement for other ISO 15552 profile cylinders using the same mounting footprint and PT1/8 port. It also includes an adjustable air cushion at both ends to fine-tune end-stop deceleration.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X1050S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.