Airtac SE32 Standard Cylinder SE32X106S
The AirTAC Airtac SE32 Standard Cylinder SE32X106S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 106mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke106 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X106S
The AirTAC SE32X106S is a double-acting single-rod profile cylinder built to ISO 15552 dimensions, delivering a push force of 402 N and pull force of 345 N at 0.5 MPa. Its 32 mm bore and 106 mm stroke provide compact linear motion for light-duty machinery. The square extruded aluminum barrel omits external tie rods, yielding a smooth, corrosion-resistant body that mounts flush against machine frames.
Because this unit includes the -S magnet code, it is fully primed for CMSE reed or DMSE electronic position sensing without further teardown. The field-adjustable pneumatic cushioning at both stroke ends allows technicians to dial in end-of-stroke deceleration via a set screw, softening impacts when cycling at speeds up to 800 mm/s.
Airtac SE32 Standard Cylinder SE32X106S Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X106S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 106 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X106S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×106 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X106S Is Used
Lab Dispenser Positioning
Drives a 106 mm stroke on automated fluid dispensing heads, using the 402 N extend force to accurately seat vials without crushing delicate glassware.
PCB Edge Guiding
Handles light lateral guiding of printed circuit boards on a conveyor, relying on the compact 32 mm profile barrel and DMSE electronic sensors for precise end-position confirmation.
Small Carton Flap Folding
Actuates folding mechanisms for small pharmaceutical cartons, utilizing the adjustable pneumatic cushions to prevent harsh slams during high-speed 800 mm/s cycling.
Is the Airtac SE32 Standard Cylinder SE32X106S the Right Cylinder?
If your application requires less thrust, stepping down is not an option as 32 mm is the smallest standard SE bore. If you need more power, the next size up is the 40 mm bore, which raises the 0.5 MPa push force to 628 N. As a 106 mm stroke is non-standard and made-to-order, expect a brief production lead time. Because it adheres strictly to the ISO 15552 mounting interface, this cylinder serves as a drop-in dimensional replacement for any comparable 32 mm ISO profile cylinder, retaining the PT1/8 port and standard mounting brackets. Note that the adjustable air cushion only decelerates the piston near stroke end; it cannot hold a load if air pressure drops. For position holding, consider a BSE rod lock variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X106S FAQ
At 0.5 MPa, the 32 mm bore provides 402 N of push force and 345 N of pull force. At 0.7 MPa, the push force increases to 563 N, with a maximum push capacity of 82 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE32X106S is dimensionally interchangeable with any standard ISO 15552 profile cylinder. It shares the standardized mounting footprint, PT1/8 port size, and M10x1.25 rod thread, allowing for a direct retrofit using your existing mounting hardware.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X106S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.