Airtac SE32 Standard Cylinder SE32X10S
The AirTAC Airtac SE32 Standard Cylinder SE32X10S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 10mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke10 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X10S
The AirTAC SE32X10S is a double-acting single-rod ISO 15552 profile cylinder engineered for compact actuation, delivering a 402 N push at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a flush, corrosion-resistant housing that mounts cleanly in tight machine envelopes.
Equipped with a built-in position magnet, this unit supports AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection. Field-adjustable air cushioning at both ends allows technicians to tune deceleration, softening hard impacts even at rapid cycle speeds.
Airtac SE32 Standard Cylinder SE32X10S Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X10S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X10S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X10S Is Used
PCB Ejector Pins
Provides the rapid 402 N extension needed to push delicate printed circuit boards out of test fixtures without damaging surface components.
Small Carton Flaps
Cycles at high speed to fold minor glue flaps on compact carton packaging lines, utilizing the 10 mm stroke for fast, repeatable tucking.
Lab Dispenser Valves
Actuates precision metering valves for chemical dispensing, where the integrated magnet triggers DMSE sensors for exact volume dosing.
Is the Airtac SE32 Standard Cylinder SE32X10S the Right Cylinder?
Selecting the 32 mm bore is optimal when your application requires around 402 N of push force at 0.5 MPa. If you need less force, note that 32 mm is the smallest standard SE size, so you would need to look outside this series; if you need more power, stepping up to the 40 mm bore provides 628 N of push at 0.5 MPa. Because this plain cylinder relies on live air pressure to maintain its position, the piston will drift if supply is lost—add a BSE rod lock if the load must be held mechanically during an emergency stop or air loss.
As a true ISO 15552 profile cylinder, it serves as a drop-in dimensional replacement for other ISO 15552 cylinders, sharing standard mounting accessories like FA front flanges or LB foot brackets. It uses a PT1/8 port and includes the -S magnet for switch integration.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X10S FAQ
At 0.5 MPa, this 32 mm bore cylinder provides 402 N of push force and 345 N of pull force. At 0.7 MPa, the push increases to 563 N, with a maximum push capacity of 82 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE32X10S is dimensionally interchangeable per ISO 15552. You can use it as a drop-in replacement for other ISO 15552 profile cylinders, reusing your existing mounting hardware and PT1/8 pneumatic connections.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.