Airtac SE32 Standard Cylinder SE32X1100S
The AirTAC Airtac SE32 Standard Cylinder SE32X1100S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 1100mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke1100 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X1100S
The AirTAC SE32X1100S is a double-acting, single-rod ISO 15552 profile cylinder engineered for long-reach linear motion. It generates 402 N of push force at 0.5 MPa and features a 1100 mm stroke, exceeding the standard 1000 mm maximum for this bore to qualify as a made-to-order configuration. The integrated -S magnet enables direct position sensing with AirTAC CMSE reed or DMSE electronic switches.
Its square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames. Field-adjustable pneumatic cushioning at both end caps allows technicians to tune deceleration via a set screw, softening hard impacts when the piston traverses the extended 1100 mm span.
Airtac SE32 Standard Cylinder SE32X1100S Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X1100S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 1100 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X1100S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×1100 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X1100S Is Used
Film Web Diverter
Routes packaging film webs across a wide machine span, using the 1100 mm stroke to shift material rolls into position without requiring multiple shorter actuators.
Tote Pusher System
Pushes empty storage totes from a conveyor lane into an accumulation zone, applying 402 N of push force at 0.5 MPa to overcome sliding friction over the long travel distance.
Lab Sample Dispenser
Moves a sampling head across a row of test tubes, relying on the -S magnet and DMSE electronic sensors to confirm precise full-stroke extension at each station.
Is the Airtac SE32 Standard Cylinder SE32X1100S the Right Cylinder?
Selecting this 32 mm bore makes sense when a compact footprint must pair with extreme reach, though buyers should verify the 402 N push at 0.5 MPa is sufficient for the payload. If an application requires less stroke or lower friction, stepping down is not possible as 32 mm is the smallest standard size. Conversely, if your load demands more authority, stepping up to the 40 mm bore provides 628 N of push at 0.5 MPa. Because this cylinder features a 1100 mm stroke, the 12 mm rod and rod bearing face increased bending moments; an external guide rail is strongly recommended to prevent side-load damage.
As a dimensionally interchangeable ISO 15552 cylinder, it serves as a drop-in replacement for other 32 mm profile cylinders, utilizing the same PT1/8 port and standard mounting accessories. Note that the adjustable air cushion only decelerates the piston near stroke end; it cannot hold a load if air pressure is lost. For position holding, consider a BSE rod lock variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X1100S FAQ
At 0.5 MPa, this 32 mm bore cylinder provides 402 N of push force and 345 N of pull force. At 0.7 MPa, the push force is 563 N, with a maximum push capacity of 82 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE32X1100S is a true ISO 15552 profile cylinder with standardized mounting dimensions, allowing it to drop-in replace other ISO 15552 cylinders of the same bore and stroke. It uses a PT1/8 port and accepts standard mounting accessories.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X1100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.