Airtac SE32 Standard Cylinder SE32X115
The AirTAC Airtac SE32 Standard Cylinder SE32X115 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 115mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke115 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X115
The AirTAC SE32X115 is a double-acting, single-rod ISO 15552 profile cylinder engineered for compact pneumatics. It delivers a 402 N push force at 0.5 MPa alongside a 345 N pull force, making it well-suited for lighter-duty automation. The square extruded aluminum barrel omits external tie rods, yielding a smooth, corrosion-resistant housing that mounts flush against machine frames to save valuable space.
This 32 mm bore unit travels 115 mm and relies on a field-adjustable air cushion at both ends to decelerate the piston near stroke completion, preventing hard end-stop impacts. Note that this specific SKU lacks a built-in position magnet, meaning it is not wired for AirTAC CMSE or DMSE sensors without modification. The cushioning is a genuine adjustable damping mechanism, not a static rubber bumper.
Airtac SE32 Standard Cylinder SE32X115 Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X115 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 115 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X115
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×115 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X115 Is Used
PCB Depaneling Router
Provides the 402 N push force needed to plunge a router bit or actuate clamps on an electronics depaneling machine, utilizing the 115 mm stroke for tool clearance.
Carton Flap Folder
Drives the folding mechanism on small packaging lines, where the compact tie-rod-free profile fits neatly within tight conveyor side frames.
Lab Dispenser Positioning
Moves volumetric dispensing heads across laboratory stations, benefiting from the adjustable end cushions to protect delicate glassware at stroke endpoints.
Is the Airtac SE32 Standard Cylinder SE32X115 the Right Cylinder?
If you need to step down from this 32 mm bore, the next available smaller ISO 15552 option typically drops to a 20 mm class, but within the standard SE lineup, 32 mm is the baseline offering 402 N push at 0.5 MPa. Stepping up to the 40 mm bore increases that output to 628 N push at 0.5 MPa. Because this is a standard double-acting cylinder, it will drift if air pressure is lost or the valve centers; use a BSE rod lock for fail-safe holding. The 115 mm stroke is under the 300 mm threshold, so standard rod-bearing bending is minimal, though external guides are still recommended for heavy radial loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X115 FAQ
The SE32X115 generates 402 N of push force and 345 N of pull force at 0.5 MPa. At 0.7 MPa, the push force is 563 N, with a maximum push capacity of 82 kgf at 1.0 MPa. It uses a PT1/8 port and a 12 mm rod with an M10x1.25 thread.
Yes, the SE32X115 is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact mounting footprint and hardware interface of other ISO 15552 profile cylinders. You can swap it directly into existing brackets without modifying the machine frame.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X115
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.