Airtac SE32 Standard Cylinder SE32X115S
The AirTAC Airtac SE32 Standard Cylinder SE32X115S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 115mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke115 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X115S
The AirTAC SE32X115S is a double-acting single-rod ISO 15552 profile cylinder engineered for compact automation. It delivers a 402 N push force at 0.5 MPa alongside a 115 mm stroke, utilizing a 12 mm rod and PT1/8 port. The square extruded aluminum barrel omits external tie rods, yielding a flush, corrosion-resistant body that mounts cleanly in tight machine cells.
Equipped with a built-in position magnet (-S), this unit interfaces directly with AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection. The field-adjustable pneumatic cushioning at both ends allows technicians to tune deceleration via a set screw, softening hard impacts when cycling at speeds up to 800 mm/s.
Airtac SE32 Standard Cylinder SE32X115S Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X115S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 115 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X115S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×115 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X115S Is Used
PCB Depaneling Ejector
Uses the 402 N extend force to push singulated circuit boards out of routing fixtures without damaging delicate traces, relying on the 115 mm stroke to clear the work zone.
Small Carton Flap Folder
Actuates a mechanical arm to tuck minor flaps on compact boxes, where the flush profile barrel avoids snagging passing packaging film.
Lab Sample Tray Indexer
Employs the built-in magnet with DMSE solid-state sensors to confirm 115 mm stroke positioning for automated blood sample tray routing.
Is the Airtac SE32 Standard Cylinder SE32X115S the Right Cylinder?
Selecting the SE32X115S is optimal when a 402 N extend force at 0.5 MPa is required within a tight 32 mm footprint. If your application demands less thrust, the adjacent 32 mm bore has no smaller ISO 15552 standard neighbor, so you would instead step down to an ISO 6432 unit. If you need greater power, stepping up to the 40 mm bore yields 628 N of push force at 0.5 MPa. Because this is a double-acting cylinder, it will drift if air pressure is lost or the valve centers; utilize a BSE rod lock for strict position holding. As a true ISO 15552 profile cylinder, it serves as a drop-in replacement for any standard 32 mm bore, 115 mm stroke unit with PT1/8 ports and standard mounting accessories.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X115S FAQ
At 0.5 MPa, this 32 mm bore cylinder provides 402 N of push force and 345 N of pull force. At 0.7 MPa, the push force is 563 N, with a maximum push capacity of 82 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes. The SE32X115S is dimensionally interchangeable per ISO 15552 / VDMA 24562 standards. You can use it as a drop-in replacement for other 32 mm bore profile cylinders with a 115 mm stroke, matching the PT1/8 port and standard mounting dimensions exactly.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X115S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.