Airtac SE32 Standard Cylinder SE32X150
The AirTAC Airtac SE32 Standard Cylinder SE32X150 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 150mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke150 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X150
The AirTAC SE32X150 is a double-acting single-rod ISO 15552 profile cylinder engineered for compact automation. It delivers a 402 N push force at 0.5 MPa, utilizing a 32 mm bore and 150 mm stroke to drive lighter payloads. The square extruded aluminum barrel omits external tie rods, yielding a flush, corrosion-resistant body that simplifies mounting and saves valuable machine space.
This SKU ships without a piston magnet, meaning it is ready for mechanical actuation but lacks the internal hardware for CMSE or DMSE position sensing. Field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration via a set screw, softening hard impacts when cycling at speeds up to 800 mm/s.
Airtac SE32 Standard Cylinder SE32X150 Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X150 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X150
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X150 Is Used
PCB Drill Bit Changer
Actuates a small vertical shuttle to swap 3.0mm carbide drill bits in a pick-and-place router, utilizing the 150mm stroke and 402N push to positively seat the tooling without over-stressing the spindle chuck.
Carton Flap Folder
Deploys a mechanical arm at 30-800 mm/s to tuck the minor flaps of small pharmaceutical cartons, relying on the adjustable end cushions to prevent tearing the light paperboard at high cycle rates.
Lab Tube Ejector
Pushes finished 15ml centrifuge tubes out of a filling carousel, where the compact tie-rod-free profile fits neatly within the tight 40mm machine envelope and the 345N pull retracts the arm cleanly.
Is the Airtac SE32 Standard Cylinder SE32X150 the Right Cylinder?
Selecting this 32 mm bore makes sense when your application requires exactly 402 N of push at 0.5 MPa. If your load demands less force, you cannot step down within the standard ISO 15552 AirTAC range, but stepping up to the 40 mm bore increases the push to 628 N. Because this is a plain double-acting cylinder, it will drift and cannot hold a vertical load if air pressure is lost or the valve centers; a BSE rod lock variant or external pilot check valve is required for secure positioning.
For retrofitting, this model is dimensionally interchangeable per ISO 15552, matching the footprint of competing profile cylinders. It features a PT1/8 port, an M10x1.25 rod thread, and standard basic mounting. With a 150 mm stroke, the 12 mm rod handles moderate side loads, though an external guide rail is recommended if lifting heavy off-center masses.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X150 FAQ
At 0.5 MPa, this 32mm bore cylinder provides 402 N of push force and 345 N of pull force. At 0.7 MPa, the push increases to 563 N. The maximum push is 82 kgf at 1.0 MPa. It operates at a speed range of 30-800 mm/s.
Yes, the SE32X150 is dimensionally interchangeable per ISO 15552, meaning it shares the exact mounting footprint and hole patterns of other standard profile cylinders. It uses a PT1/8 port and M10x1.25 rod thread. Note that this specific SKU lacks a magnet, so it will not work with CMSE or DMSE sensors without modification.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X150
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.