Airtac SE32 Standard Cylinder SE32X150SN
The AirTAC Airtac SE32 Standard Cylinder SE32X150SN is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 150mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke150 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X150SN
The AirTAC SE32X150SN is a double-acting single-rod ISO 15552 profile cylinder, delivering a 402 N push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames.
This 32 mm bore unit integrates a built-in magnet for CMSE (reed) and DMSE (solid-state) position sensing, paired with an NBR seal for standard pneumatic duty. Field-adjustable air cushions at both ends allow you to fine-tune end-of-stroke deceleration, protecting payloads during 150 mm travel.
Airtac SE32 Standard Cylinder SE32X150SN Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X150SN |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X150SN
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X150SN Is Used
PCB Router Spindle Z-Axis
Lifts and lowers a light-duty routing spindle across 150 mm travel, using the 402 N extend force to plunge through FR4 fiberglass boards while the NBR seal handles continuous factory air supply.
Carton Flap Folder
Drives a mechanical arm to fold corrugated cardboard flaps at high speed, relying on the field-adjustable air cushion to soften the end stop and prevent tearing the packaging material.
Lab Sample Dispenser
Actuates a diverter gate to route fluid vials into processing trays, utilizing the built-in magnet with a DMSE electronic sensor to confirm gate position in automated diagnostic equipment.
Is the Airtac SE32 Standard Cylinder SE32X150SN the Right Cylinder?
For sizing, the 32 mm bore provides 402 N push at 0.5 MPa. If your mechanism requires less force, stepping down is not an option as this is the smallest standard SE bore. If you need more power, stepping up to the 40 mm bore yields 628 N push at 0.5 MPa. Keep in mind that a plain SE cylinder will drift and cannot hold a load if air pressure is lost; a BSE rod lock variant is required for fail-safe holding.
As a true ISO 15552 profile cylinder, this model is dimensionally interchangeable with other ISO 15552 cylinders, sharing standard mounting hardware. It features a PT1/8 port, a 150 mm stroke, and the -S magnet option. Since the stroke is 150 mm, side-load bending on the 12 mm rod and bearing is minimal, but an external guide remains essential for heavily offset loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X150SN FAQ
At 0.5 MPa, this 32 mm bore cylinder provides 402 N of push force and 345 N of pull force. At 0.7 MPa, the push force is 563 N, with a maximum push capacity of 82 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, it is dimensionally interchangeable per ISO 15552, serving as a drop-in replacement sharing standard mounting interfaces. However, it is a standard double-acting cylinder and will drift if air is lost; it cannot hold a load without live pressure. For secure holding, use a BSE rod lock variant.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X150SN
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.