Airtac SE32 Standard Cylinder SE32X60SH
The AirTAC Airtac SE32 Standard Cylinder SE32X60SH is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 60mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke60 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X60SH
The AirTAC SE32X60SH is a double-acting, single-rod ISO 15552 profile cylinder engineered for high-temperature pneumatics. It delivers 402 N of push force and 345 N of pull force at 0.5 MPa, utilizing a 32 mm bore and 60 mm stroke. Fitted with a Viton (FKM) seal, this variant reliably operates in environments up to 150 °C where standard TPU seals would fail.
The extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machinery. Integrated sensor grooves on three sides accept CMSE reed and DMSE electronic switches via the built-in -S magnet. Field-adjustable pneumatic cushioning at both stroke ends allows you to fine-tune deceleration, protecting the 12 mm hard-chrome rod during rapid 30-800 mm/s cycling.
Airtac SE32 Standard Cylinder SE32X60SH Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X60SH |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X60SH
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X60SH Is Used
Thermal Film Lamination
Drives heated pressure rollers in industrial laminators, where the FKM Viton seal survives 150 C ambient heat while providing 402 N of precise clamping force.
Shrink Wrap Tucking
Actuates tuck blades near heat tunnels, leveraging the 60 mm stroke and built-in magnet for DMSE electronic position feedback in high-temp zones.
Hot Stamping Ejector
Ejects stamped foils from heated platens, using adjustable end cushions to soften 30-800 mm/s cycle impacts without leaking under thermal stress.
Is the Airtac SE32 Standard Cylinder SE32X60SH the Right Cylinder?
This 32 mm bore generates 402 N push at 0.5 MPa. If your assembly requires less force, stepping down is not an option as 32 mm is the smallest standard SE size; you would instead reduce your operating pressure. If you need more power, stepping up to the 40 mm bore yields 628 N push at 0.5 MPa. As a standard ISO 15552 profile cylinder, it serves as a drop-in dimensional replacement for competing ISO 15552 cylinders, sharing identical mounting interface dimensions and PT1/8 ports. Remember that a plain SE cylinder will drift and cannot hold a load if air pressure is lost; use a BSE rod lock for positive holding. To match this exact unit, specify: 32 mm bore, 60 mm stroke, FKM (H) high-temp seal, PT1/8 port, built-in magnet (-S), and your required ISO mounting accessory.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X60SH FAQ
The SE32X60SH provides 402 N push and 345 N pull at 0.5 MPa, 563 N push at 0.7 MPa, and a maximum push of 82 kgf at 1.0 MPa. Because it uses an FKM (Viton) seal, its operating temperature range extends from -20 C to +150 C, and it features a 12 mm rod with an M10x1.25 thread.
Yes, it is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact mounting footprint and PT1/8 port locations of other standard profile cylinders. However, it is a double-acting cylinder and cannot hold a load if air is exhausted; for vertical loads that must remain secure during pressure loss, an AirTAC BSE rod lock variant is required.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X60SH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.