Airtac SE32 Standard Cylinder SE32X63S
The AirTAC Airtac SE32 Standard Cylinder SE32X63S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 63mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke63 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X63S
The AirTAC SE32X63S is a double-acting single-rod profile cylinder built to ISO 15552 standards, delivering a push force of 402 N at 0.5 MPa. Its 32 mm bore and 63 mm stroke make it highly effective for compact positioning tasks. The square extruded aluminum barrel omits external tie rods, yielding a clean, flush-mounting body that naturally resists corrosion and saves valuable machine space.
Equipped with a built-in magnet (S option), this unit directly supports AirTAC CMSE reed and DMSE electronic position sensors for precise end-of-stroke verification. The field-adjustable air cushioning at both ends allows technicians to tune the end-of-stroke deceleration via a set screw, effectively softening hard impacts when cycling at speeds up to 800 mm/s.
Airtac SE32 Standard Cylinder SE32X63S Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X63S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 63 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X63S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×63 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X63S Is Used
PCB Handling Gates
Ideal for routing small electronic panels on conveyor lines, where the 402 N push force smoothly actuates diverter arms within a compact 63 mm stroke.
Small Carton Flap Folding
Drives the mechanical folders on compact packaging machines, utilizing the adjustable end cushions to prevent tearing light cardboard at high cycling speeds.
Lab Dispenser Positioning
Moves volumetric dispensing heads in automated laboratory equipment, relying on the built-in magnet and DMSE sensors to confirm precise 63 mm travel.
Is the Airtac SE32 Standard Cylinder SE32X63S the Right Cylinder?
If your application requires slightly less thrust, stepping down is not an option as 32 mm is the smallest standard SE bore. Conversely, if you need more power, stepping up to the 40 mm bore provides a 628 N push at 0.5 MPa. This SE32X63S configuration features a PT1/8 port, a 12 mm rod, and the -S magnet, making it a drop-in replacement for any standard ISO 15552 footprint cylinder.
Keep in mind that a standard double-acting cylinder relies on continuous air pressure to maintain its load. If air is lost or the valve is centered, the piston will drift; for strict load-holding requirements, consider the BSE rod-lock variant or an external pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X63S FAQ
At 0.5 MPa, this 32 mm bore cylinder provides 402 N of push force and 345 N of pull force. At 0.7 MPa, the push force is 563 N, with a maximum push capacity of 82 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE32X63S is dimensionally interchangeable with any standard ISO 15552 profile cylinder. It shares the standardized mounting interface and utilizes a PT1/8 port, allowing for a direct retrofit without modifying your existing equipment.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X63S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.