Airtac SE32 Standard Cylinder SE32X660S
The AirTAC Airtac SE32 Standard Cylinder SE32X660S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 660mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke660 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X660S
The AirTAC SE32X660S is a double-acting single-rod ISO 15552 profile cylinder, engineered to deliver a push force of 402 N and a pull force of 345 N at 0.5 MPa. Its 32 mm bore and 660 mm stroke suit compact positioning tasks that require extended reach without demanding massive output force.
Built with a square extruded aluminum barrel that eliminates external tie rods, this unit mounts flush against machine frames to resist corrosion and save valuable space. The integrated magnet (-S) supports AirTAC CMSE reed and DMSE electronic sensors for precise end-position detection, while field-adjustable air cushioning at both ends allows you to fine-tune deceleration and soften hard end stops.
Airtac SE32 Standard Cylinder SE32X660S Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X660S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 660 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X660S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×660 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X660S Is Used
Packaging Divert Gate
Actuates a lightweight routing flap on a packaging conveyor, using the 660 mm stroke to shift cartons between lanes with 402 N of push force.
Lab Sample Transport
Extends a tray carriage in automated laboratory diagnostics equipment, relying on the flush profile barrel and DMSE electronic sensor for clean, precise positioning.
Tote Pusher Mechanism
Pushes empty storage totes from an accumulation roller conveyor, utilizing the extended stroke and adjustable pneumatic cushioning to prevent impact at the end of travel.
Is the Airtac SE32 Standard Cylinder SE32X660S the Right Cylinder?
Selecting this 32 mm bore makes sense when your application requires light force and long linear travel; if you need less reach, stepping down to the SE32X50 offers identical 402 N push in a shorter footprint. If your mechanism demands higher thrust, stepping up to the 40 mm bore increases the push force to 628 N at 0.5 MPa. Keep in mind the plain SE design does not hold a load if air pressure drops; use a BSE rod lock for fail-safe braking. Because the 660 mm stroke exceeds 300 mm, the 12 mm rod is subject to bending under side loads, so mounting an external guide rail is critical to prevent premature bearing wear.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X660S FAQ
At 0.5 MPa, this 32 mm bore cylinder provides 402 N of push force and 345 N of pull force. At 0.7 MPa, the push force increases to 563 N, with a maximum push capacity of 82 kgf at 1.0 MPa. The standard operating speed ranges from 30 to 800 mm/s.
Yes, the SE32X660S is dimensionally interchangeable per ISO 15552 standards. It shares the standardized mounting interface and PT1/8 port size of other ISO 15552 profile cylinders, allowing a direct retrofit without modifying your existing machine footprints or hardware.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X660S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.