Airtac SE32 Standard Cylinder SE32X700
The AirTAC Airtac SE32 Standard Cylinder SE32X700 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 700mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke700 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X700
The AirTAC SE32X700 is a double-acting, single-rod ISO 15552 profile cylinder engineered for compact, high-speed automation. Delivering 402 N of push force at 0.5 MPa, it is built around an extruded aluminum barrel that omits external tie rods for a clean, corrosion-resistant exterior that mounts flush against machine frames.
Because this specific SKU lacks the -S magnet code, it is not equipped for electronic position sensing out of the box. Field-adjustable pneumatic cushioning at both stroke ends allows precise tuning of the 27 mm cushion length to soften hard end-stops during rapid 30-800 mm/s cycling.
Airtac SE32 Standard Cylinder SE32X700 Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X700 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X700
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X700 Is Used
PCB Drill Clamping
Provides 402 N of precise clamping force at 0.5 MPa to secure thin printed circuit boards within automated drilling machinery over its 700 mm travel.
Packaging Diverter
Actuates a lightweight routing gate on a high-speed packaging conveyor, utilizing its 345 N pull force and adjustable end cushions to prevent shock loads.
Lab Sample Indexing
Shifts test tube racks between analytical stations in laboratory automation, benefiting from the smooth, tie-rod-free extruded profile that resists chemical spills.
Is the Airtac SE32 Standard Cylinder SE32X700 the Right Cylinder?
Stepping down to a smaller bore is not an option since 32 mm is the smallest standard SE size. If your process requires greater thrust, the next size up is the 40 mm bore, which raises the 0.5 MPa push output to 628 N. Both options share the same standardized ISO 15552 mounting interface for drop-in hardware compatibility.
With a 700 mm stroke, the unsupported piston rod is highly susceptible to bending under side loads, making an external guide rail essential to prevent premature bearing wear. Remember that a standard SE cylinder cannot hold a load if air pressure drops; for fail-safe position holding, explore the BSE rod-lock variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X700 FAQ
The SE32X700 generates 402 N of push force and 345 N of pull force at 0.5 MPa. At 0.7 MPa, the push force is 563 N, with a maximum push capacity of 82 kgf at 1.0 MPa. It features a PT1/8 port and a 12 mm rod.
Yes, the SE32X700 is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact mounting footprint and hardware of competing profile cylinders. This allows for seamless retrofits without altering existing machine mounting plates.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X700
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.