Airtac SE32 Standard Cylinder SE32X700S
The AirTAC Airtac SE32 Standard Cylinder SE32X700S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 700mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke700 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X700S
The AirTAC SE32X700S is a double-acting, single-rod ISO 15552 profile cylinder engineered for compact pneumatics. It delivers 402 N of push force and 345 N of pull force at 0.5 MPa, peaking at 82 kgf under 1.0 MPa. The extruded aluminum barrel omits external tie rods, yielding a flush, corrosion-resistant body that drops directly into standardized ISO 15552 mounting footprints.
Because this 700 mm stroke unit carries the -S option, it includes a built-in magnet for non-contact position sensing with AirTAC CMSE reed or DMSE electronic switches. The field-adjustable pneumatic cushioning at both ends is tuned via a set screw to absorb kinetic energy smoothly at high cycle rates, ensuring quiet deceleration without hard mechanical bumping.
Airtac SE32 Standard Cylinder SE32X700S Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X700S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X700S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X700S Is Used
Printed Circuit Board Handling
Drives 700 mm linear transfers in PCB pick-and-place machines, utilizing the 345 N pull force and built-in DMSE sensor magnet for precise end-of-stroke verification.
Semiconductor Wafer Sorting
Actuates 700 mm stroke movements in wafer sorting bins, where the tie-rod-free extruded barrel prevents particle traps in cleanroom environments.
Lab Dispenser Positioning
Extends 700 mm to move fluid dispensing heads across multi-well plates, relying on the field-adjustable cushions to prevent sudden end-stop vibrations.
Is the Airtac SE32 Standard Cylinder SE32X700S the Right Cylinder?
For a 32 mm bore at a 700 mm stroke, the 12 mm piston rod and M10x1.25 thread provide structural rigidity, but this length mandates an external guide to prevent rod-bearing bending under lateral loads. If your application requires less force, stepping down is not an option below 32 mm in the SE series, but stepping up to the 40 mm bore yields 628 N of push at 0.5 MPa. Conversely, if you need to hold a load statically without live air pressure, this cylinder will drift, and you must specify a BSE rod-lock variant or an external pilot-operated check valve. As a true ISO 15552 profile cylinder, it shares standardized mounting interfaces and accessories with equivalent cylinders from other manufacturers, easing retrofitting.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X700S FAQ
The SE32X700S generates 402 N of push force and 345 N of pull force at 0.5 MPa, increasing to 563 N push at 0.7 MPa, with a maximum push of 82 kgf at 1.0 MPa. It operates on filtered air at 0.15-1.0 MPa, runs at speeds of 30-800 mm/s, and uses a PT1/8 port.
Yes, the SE32X700S is dimensionally interchangeable per ISO 15552 standards. It utilizes the same standardized mounting interface and hardware footprint as other ISO 15552 profile cylinders, allowing for a seamless drop-in retrofit without modifying existing machine plates.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X700S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.