Airtac SE40 Standard Cylinder SE40BX60S
The AirTAC SE40 Standard Cylinder SE40BX60S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 60mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ40 mm
- Stroke60 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM12×1.25
- CushionAdjustable, 30 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE40 Standard Cylinder SE40BX60S
The AirTAC SE40BX60S is a double-acting, single-rod ISO 15552 profile cylinder engineered for rigorous automation tasks. It delivers a robust 628 N push force at 0.5 MPa over a 60 mm stroke. Equipped with a SUS304 stainless steel rod, this variant is purpose-built to withstand corrosive environments and frequent washdowns without compromising operational integrity.
The extruded aluminum barrel eliminates external tie rods, yielding a highly compact footprint that mounts flush against machine frames while resisting debris buildup. Integrated sensor magnets allow seamless position detection using AirTAC CMSE reed or DMSE electronic switches. Furthermore, the field-adjustable pneumatic cushioning at both ends lets technicians fine-tune end-of-stroke deceleration to match varying load speeds.
Airtac SE40 Standard Cylinder SE40BX60S Technical Specifications
| Model | Airtac SE40 Standard Cylinder SE40BX60S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE40 Standard Cylinder SE40BX60S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE40 Standard Cylinder SE40BX60S Is Used
Bottling Line Diverter
Utilizes the 628 N push force and SUS304 rod to reliably actuate stainless steel diverter gates on beverage filling lines during high-speed washdown cycles.
Pouch Forming Clamp
Applies precise 60 mm stroke clamping pressure on vertical form-fill-seal packaging machinery, ensuring consistent film alignment before the sealing jaw closes.
PCB Panel Ejector
Leverages the compact tie-rod-free profile and DMSE sensor magnet to push printed circuit boards out of testing fixtures within confined electronics assembly cells.
Is the Airtac SE40 Standard Cylinder SE40BX60S the Right Cylinder?
Selecting this 40 mm bore cylinder makes sense when your application requires 628 N of push force at 0.5 MPa. If your load demands less energy, you can step down to the 32 mm bore, which offers 402 N of push. Conversely, heavier payloads necessitate stepping up to the 50 mm bore, providing 982 N of push. Because this is a standard double-acting cylinder, it will drift if air pressure is lost or the valve is centered; use a BSE rod lock for fail-safe position holding.
As a true ISO 15552 component, the SE40BX60S serves as a direct dimensional replacement for any standard ISO 15552 cylinder, simplifying retrofits and sharing standard mounting accessories. It features a PT1/4 port, a 16 mm rod with an M12x1.25 thread, and the built-in magnet (-S) required for CMSE and DMSE sensors. The standard 60 mm stroke is well below the maximum 1200 mm limit, keeping the rod bearing well-supported without needing an external guide.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE40 Standard Cylinder SE40BX60S FAQ
At 0.5 MPa, this 40 mm bore cylinder provides 628 N of push force and 528 N of pull force. At 0.7 MPa, the push force increases to 879 N, and it reaches a maximum push of 128 kgf at 1.0 MPa.
Yes, the SE40BX60S is dimensionally interchangeable per ISO 15552 standards, allowing it to serve as a direct replacement for other ISO 15552 profile cylinders while utilizing existing mounting hardware and PT1/4 pneumatic connections.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE40 Standard Cylinder SE40BX60S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.