Airtac SE40 Standard Cylinder SE40BX80S
The AirTAC SE40 Standard Cylinder SE40BX80S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 80mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ40 mm
- Stroke80 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM12×1.25
- CushionAdjustable, 30 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE40 Standard Cylinder SE40BX80S
The AirTAC SE40BX80S is a double-acting, single-rod ISO 15552 profile cylinder delivering 628 N of push force at 0.5 MPa. It features a SUS304 stainless steel piston rod engineered for corrosive or washdown environments. The square extruded aluminum barrel omits external tie rods, yielding a compact footprint that mounts flush against machine frames while resisting mechanical corrosion.
Integrated with a built-in magnet (-S), this unit supports AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection. Field-adjustable pneumatic cushioning at both ends allows technicians to tune deceleration via a set screw, softening hard mechanical stops during high-speed cycling.
Airtac SE40 Standard Cylinder SE40BX80S Technical Specifications
| Model | Airtac SE40 Standard Cylinder SE40BX80S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE40 Standard Cylinder SE40BX80S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE40 Standard Cylinder SE40BX80S Is Used
Flow Wrapper Folding Gates
Drives the mechanical folding turrets on continuous-motion flow wrappers, where the 628 N push force securely tucks film around products at high cycle rates.
Lab Diagnostic Carousels
Indexes sample carousels in automated hematology analyzers, leveraging the SUS304 rod to withstand frequent chemical splashes and decontamination washdowns.
Bottling Line Diverter
Actuates lane diverter arms on glass bottling conveyors, utilizing the 80mm stroke and adjustable end-cushions to gently reroute containers without impact breakage.
Is the Airtac SE40 Standard Cylinder SE40BX80S the Right Cylinder?
If your application requires less thrust, the 32mm bore variant offers 402 N of push at 0.5 MPa, whereas stepping up to the 50mm bore provides 982 N. This 40mm bore strikes a practical balance for medium-duty positioning. To match this exact ISO 15552 footprint for a retrofit, specify the 40mm bore, 80mm stroke, PT1/4 port, and the SUS304 rod requirement. Note that a standard SE cylinder will drift if air pressure is lost; for fail-safe load holding, consider the BSE rod-lock variant instead.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE40 Standard Cylinder SE40BX80S FAQ
At 0.5 MPa, it provides 628 N push and 528 N pull. At 0.7 MPa, the push increases to 879 N, with an absolute maximum push of 128 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes. The SE40BX80S is dimensionally interchangeable per ISO 15552 / VDMA 24562, meaning it shares the exact mounting footprint and hardware of competing profile cylinders. Its built-in magnet also works seamlessly with AirTAC CMSE and DMSE sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE40 Standard Cylinder SE40BX80S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.