
The AirTAC SE40 Standard Cylinder SE40X100LB is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 100mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X100LB is a double-acting, single-rod ISO 15552 profile cylinder engineered for 40 mm bore applications. It delivers a robust 628 N push force at 0.5 MPa and 879 N at 0.7 MPa, making it highly effective for mid-range industrial actuation. The extruded aluminum barrel design omits external tie rods entirely, yielding a highly compact, corrosion-resistant body that mounts flush against machine frames.
This specific configuration includes an LB foot mounting bracket for rigid base mounting and utilizes a PT1/4 port. The field-adjustable pneumatic cushioning at both stroke ends allows technicians to fine-tune end-of-stroke deceleration via a set screw, effectively absorbing kinetic energy to prevent hard mechanical impacts. Note that this SKU is supplied without a built-in magnet, meaning it does not directly support AirTAC CMSE or DMSE electronic position sensors without modification.
| Model | Airtac SE40 Standard Cylinder SE40X100LB |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the precise 628 N push and 100 mm travel needed to fold and seal corrugated cardboard flaps on high-speed packaging lines.
Drives the diverter arms on modular conveyor belts, using the LB foot mount to withstand lateral shifting as product traffic is redirected.
Handles the automated opening and closing of heavy machine tool safety doors, benefiting from the adjustable cushion to soften the 100 mm end-stop.
Stepping down to a 32 mm bore reduces the 0.5 MPa push force to 402 N, which may be insufficient if your payload approaches the 628 N threshold of this 40 mm unit. Conversely, scaling up to a 50 mm bore increases the 0.5 MPa push output to 982 N, offering a substantial buffer for heavier friction or dynamic loading. Because this is a standard double-acting cylinder, it cannot hold a load in place if air pressure is lost or the directional valve is centered; the piston will drift, requiring an external pilot-operated check valve or a BSE rod-lock variant for true position holding. The LB foot mount provides excellent stability against shear forces, but for any horizontal stroke approaching or exceeding 300 mm, you must incorporate an external guide rail to prevent rod-bearing bending and premature seal wear. As a true ISO 15552 cylinder, it is dimensionally interchangeable with other ISO 15552 profile cylinders, allowing you to use existing standardized mounting hardware and drop it directly into legacy equipment retrofits.
Quick checklist
At 0.5 MPa, this 40 mm bore cylinder provides 628 N of push force and 528 N of pull force. At 0.7 MPa, the push force is 879 N. The maximum drive force is 128 kgf at the maximum operating pressure of 1.0 MPa.
Yes, the SE40X100LB is manufactured to the ISO 15552 / VDMA 24562 dimensional standard, meaning its mounting footprint, port locations, and rod-end thread (M12x1.25) are fully interchangeable with other ISO 15552 profile cylinders, making it a direct retrofit solution.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.