verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE40 Standard Cylinder SE40X105

The AirTAC SE40 Standard Cylinder SE40X105 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 105mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke105 mm
  • Port sizePT1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$58.59 $66.09Save 11% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SE40 stroke, mounting and version on one page All SE40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SE40 Standard Cylinder SE40X105

The AirTAC SE40X105 is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver 628 N of push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames. This clean profile simplifies retrofitting into tight automation cells while maintaining the standardized ISO 15552 mounting interface.

Because this specific unit lacks the S option code for a built-in magnet, it does not support direct position sensing without external retrofit. However, it retains the core SE advantages: field-adjustable air cushioning at both ends to soften end-of-stroke impacts, a 16 mm hard-chrome rod, and PT1/4 ports. The 105 mm stroke is a non-standard made-to-order length, ensuring exact travel for specialized tooling without requiring mechanical spacers.

Airtac SE40 Standard Cylinder SE40X105 Technical Specifications

ModelAirtac SE40 Standard Cylinder SE40X105
SeriesSE ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke105 mm
Acting typeDouble acting
Port sizePT1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa628 N528 N
0.7 MPa880 N—
Max (@1.0 MPa)128 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE40 Standard Cylinder SE40X105

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
40Bore size in mm.
×105Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE40 Standard Cylinder SE40X105 Is Used

packaging

Carton Flap Folding

Drives the mechanical arms that tuck adhesive flaps on a packaging line, utilizing the 105 mm stroke to clear varying box heights without overtravel.

conveyor_belt

Pallet Diverter Gate

Actuates a routing flap on a conveyor to push pallets onto a secondary spur, relying on the 628 N push force to overcome friction on heavy loads.

view_module

PCB Test Fixture

Lowers an array of test probes onto populated circuit boards, where the tie-rod-free extruded profile allows flush mounting inside dense test racks.

Is the Airtac SE40 Standard Cylinder SE40X105 the Right Cylinder?

When sizing this 40 mm bore actuator, evaluate your force margins carefully. If 628 N of push at 0.5 MPa is excessive or you need faster cycling with lower air consumption, stepping down to the 32 mm bore yields 402 N. Conversely, if your payload demands more authority, stepping up to the 50 mm bore provides 982 N. This SE40X105 is dimensionally interchangeable with other ISO 15552 cylinders, accepting standard mounting accessories like FA front flanges or LB foot brackets. It uses a PT1/4 port and, lacking the -S magnet, requires external limit switches for end-position confirmation.

Remember that a standard double-acting cylinder drifts when air pressure is lost or the valve centers; the adjustable cushion only decelerates the piston near stroke end and does not function as a locking brake. If your application requires strict position holding under load loss, consider the BSE rod-lock variant or an external pilot-operated check valve.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE40 Standard Cylinder SE40X105 FAQ

At 0.5 MPa, the SE40X105 provides 628 N of push force and 528 N of pull force. At 0.7 MPa, the push force increases to 879 N, with a maximum push capacity of 128 kgf at 1.0 MPa. It operates on filtered air at 0.15-1.0 MPa, runs at speeds of 30-800 mm/s, and features a 16 mm rod with a PT1/4 port.

Yes, the SE40X105 is dimensionally interchangeable per ISO 15552 standards. You can use it as a direct replacement for other ISO 15552 profile cylinders of the same bore and stroke, reusing existing mounting hardware like foot brackets or flanges without modifying the machine frame.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE40 Standard Cylinder SE40X105

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SE40X105 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.