
The AirTAC SE40 Standard Cylinder SE40X110 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 110mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X110 is a double-acting single-rod profile cylinder built to the ISO 15552 standard, delivering a push force of 628 N at 0.5 MPa and a maximum output of 128 kgf at 1.0 MPa. Its square extruded aluminum barrel completely eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames.
This 40 mm bore unit features a PT1/4 port and a 16 mm hard-chrome plated rod. Because this specific SKU lacks the built-in magnet suffix (-S), it does not support direct CMSE or DMSE electronic position sensing without modification. Field-adjustable air cushioning at both ends allows technicians to tune end-of-stroke deceleration via a set screw, softening hard impacts when cycling at speeds up to 800 mm/s.
| Model | Airtac SE40 Standard Cylinder SE40X110 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the precise 628 N push force and 110 mm travel needed to fold corrugated cardboard flaps on automated packaging lines prior to sealing.
Actuates routing gates on conveyor systems, using its adjustable pneumatic cushions to soften the stroke when snapping the gate into position at high speed.
Drives the upper platen of an electronic testing fixture, where the tie-rod-free extruded profile allows for flush mounting and space-saving integration.
Selecting the SE40X110 provides 628 N of push force at 0.5 MPa over a 110 mm stroke. If your application requires less force, stepping down to the 32 mm bore yields 402 N of push, while moving up to the 50 mm bore provides 982 N for heavier payloads. As a standard ISO 15552 cylinder, it serves as a direct replacement for any matching 40x110 profile cylinder, utilizing standard mounting accessories like FA front flanges or LB foot brackets.
Remember that the adjustable air cushion only decelerates the piston near the stroke ends; it is not a locking mechanism. If the pneumatic supply is lost or the valve centers, the rod will drift and cannot hold a vertical load. For position-holding safety, consider the BSE rod-lock variant or an external pilot-operated check valve.
Quick checklist
At 0.5 MPa, the SE40X110 generates 628 N of push force and 528 N of pull force. At 0.7 MPa, the push force increases to 879 N. The maximum rated push force is 128 kgf when operated at the 1.0 MPa pressure limit.
No, this specific SE40X110 SKU does not include the S option for a built-in piston magnet, meaning it will not trigger CMSE reed or DMSE electronic sensors. If position detection is required, you must specify an SE40X110S model to include the internal magnet.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.