
The AirTAC SE40 Standard Cylinder SE40X120 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 120mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X120 is a double-acting single-rod ISO 15552 profile cylinder with a 40 mm bore and 120 mm stroke. It generates 628 N of push force at 0.5 MPa and 879 N at 0.7 MPa, making it well-suited for mid-range industrial actuation.
The extruded aluminum barrel lacks external tie rods, yielding a smooth, corrosion-resistant profile that mounts flush in confined spaces. Field-adjustable pneumatic cushioning at both ends lets you tune end-of-stroke deceleration to minimize impact wear, while the PT1/4 port and M12x1.25 rod thread match standard ISO 15552 hardware.
| Model | Airtac SE40 Standard Cylinder SE40X120 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 120 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×120 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides 628 N of push at 0.5 MPa to secure aluminum castings against a machining vice during high-speed milling operations.
Utilizes the 120 mm stroke to mechanically fold corrugated cardboard flaps prior to case sealing on a high-throughput packaging line.
Actuates a routing arm to push secondary packages onto an auxiliary spur conveyor without interrupting main belt flow.
If your application requires less force, stepping down to the 32 mm bore yields 402 N of push at 0.5 MPa, whereas moving up to the 50 mm bore provides 982 N. Because this is a standard 120 mm stroke, it drops directly into existing ISO 15552 footprints without altering mounting hardware. Note that this specific SKU lacks a built-in magnet, so position sensing via CMSE or DMSE switches is not supported without a model change. As a double-acting cylinder, it relies on continuous air pressure to hold position and will drift if air is lost.
Quick checklist
At 0.5 MPa, the push force is 628 N and the pull force is 528 N. At 0.7 MPa, the push force is 879 N. The maximum push force is 128 kgf at 1.0 MPa. The operating pressure range is 0.15-1.0 MPa, with a speed range of 30-800 mm/s.
Yes, the SE40X120 is dimensionally interchangeable per ISO 15552 standards. Its standardized mounting interface, PT1/4 port, and M12x1.25 rod thread allow it to serve as a direct replacement for other ISO 15552 profile cylinders without requiring custom brackets.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.