Airtac SE40 Standard Cylinder SE40X130SCBCR
The AirTAC SE40 Standard Cylinder SE40X130SCBCR is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 130mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ40 mm
- Stroke130 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM12×1.25
- CushionAdjustable, 30 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE40 Standard Cylinder SE40X130SCBCR
The AirTAC SE40X130SCBCR is a double-acting single-rod ISO 15552 profile cylinder delivering a 628 N push force at 0.5 MPa. Its square extruded aluminum barrel lacks external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while retaining the standardized ISO 15552 interface. Equipped with a built-in magnet, it directly supports AirTAC CMSE reed and DMSE electronic position sensors for precise end-of-stroke verification.
This 40mm bore unit features a 16mm hard-chrome rod with an M12x1.25 thread, paired with a 30mm field-adjustable pneumatic cushion at both ends. The cushioning screw lets technicians fine-tune end-of-stroke deceleration to eliminate hard mechanical impacts during high-speed 30-800 mm/s cycling. Configured with a CB double clevis mount, it is purpose-built for pivoting articulating loads.
Airtac SE40 Standard Cylinder SE40X130SCBCR Technical Specifications
| Model | Airtac SE40 Standard Cylinder SE40X130SCBCR |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE40 Standard Cylinder SE40X130SCBCR
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×130 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE40 Standard Cylinder SE40X130SCBCR Is Used
Flow-Wrap Sealer Pivot
Drives the articulating sealing jaw pivot on continuous flow-wrap packaging lines, utilizing the 628 N push force and CB clevis to accommodate angular motion during the 130mm stroke.
Pallet Divert Arm
Actuates a sweeping diverter arm on a 50mm conveyor belt, relying on the built-in magnet and DMSE electronic sensor to confirm load redirection at 800 mm/s.
Lab Sample Centrifuge Gate
Manages the access gate pivot on a high-speed laboratory centrifuge, using the adjustable pneumatic cushion to gently decelerate the 130mm stroke and protect sensitive rotor assemblies.
Is the Airtac SE40 Standard Cylinder SE40X130SCBCR the Right Cylinder?
Stepping down to a 32mm bore reduces the 0.5 MPa push to 402 N, whereas moving up to a 50mm bore increases it to 982 N, allowing you to scale actuation force precisely to the load. The CB double clevis mount is ideal for articulating mechanisms where the cylinder must pivot. Remember that a plain SE cylinder cannot hold a load if air pressure is lost or the valve is centered; the piston will drift. For position holding without live pressure, consider a BSE rod lock variant. As an ISO 15552 profile cylinder, it serves as a dimensionally interchangeable direct replacement for other ISO 15552 cylinders, sharing standard mounting hardware. At 130mm stroke, side loads are moderate, but always verify rod-bearing bending limits on unsupported articulating pivots.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE40 Standard Cylinder SE40X130SCBCR FAQ
At 0.5 MPa, the SE40X130SCBCR generates 628 N of push force and 528 N of pull force. At 0.7 MPa, the push force is 879 N, with a maximum push of 128 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE40X130SCBCR is dimensionally interchangeable per ISO 15552 standards. It features a standard PT1/4 port and a CB double clevis mounting interface, allowing it to function as a direct replacement for other ISO 15552 profile cylinders without altering the machine footprint.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE40 Standard Cylinder SE40X130SCBCR
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.