
The AirTAC SE40 Standard Cylinder SE40X1310 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 1310mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X1310 is a double-acting single-rod profile cylinder operating on the ISO 15552 standard. It provides 628 N of push force at 0.5 MPa and 879 N at 0.7 MPa. Because this 1310 mm stroke exceeds the 1200 mm standard maximum, it is manufactured as a non-standard made-to-order unit.
The extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush within tight machine frames. Field-adjustable air cushioning at both ends allows you to tune end-of-stroke deceleration via a screw, softening hard impacts during high-speed cycling. This specific SKU lacks the -S magnet, so position sensing is not available out of the box.
| Model | Airtac SE40 Standard Cylinder SE40X1310 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 1310 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×1310 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Uses the 1310 mm stroke to transfer cardboard cartons between packaging line zones, relying on the 628 N push force to overcome belt friction.
Raises a light tote using the full 1310 mm travel, requiring an external linear guide to prevent side-load bending on the 16 mm rod.
Actuates a traversing guide arm that winds long continuous fabric rolls, benefiting from the adjustable cushion to soften rapid direction changes.
If sizing your load, consider stepping up to the 50 mm bore for 982 N of push at 0.5 MPa, or down to the 32 mm bore for 402 N. At 1310 mm of unsupported stroke, the 16 mm rod and M12x1.25 thread face significant bending moments; an external guide is strongly recommended to prevent premature side-load wear. As a true ISO 15552 profile cylinder, it serves as a direct replacement sharing standard mounting hardware and PT1/4 ports. Note that the air cushion only decelerates the piston near stroke end and does not hold the load if air pressure is lost—use a BSE rod lock for secure positioning.
Quick checklist
At 0.5 MPa it provides 628 N push and 528 N pull, increasing to 879 N push at 0.7 MPa, with a maximum push of 128 kgf at 1.0 MPa. The 1310 mm stroke exceeds the 1200 mm standard maximum, making it a non-standard made-to-order configuration.
Yes, it is dimensionally interchangeable with other ISO 15552 cylinders and shares standard mounting accessories. The extruded profile barrel has no external tie rods, and the PT1/4 port matches the 40 mm bore standard.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.