
The AirTAC SE40 Standard Cylinder SE40X150S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 150mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X150S is a double-acting, single-rod ISO 15552 profile cylinder with a 40 mm bore and 150 mm stroke. It delivers a push force of 628 N and a pull force of 528 N at 0.5 MPa, making it a solid choice for mid-range actuation. The square extruded aluminum barrel eliminates external tie rods, yielding a compact footprint that mounts flush against machine frames while resisting corrosion.
Because this variant includes the -S magnet, it is wired for immediate integration with AirTAC CMSE reed and DMSE electronic position sensors along the three integrated sensor grooves. The field-adjustable air cushioning at both ends lets you dial in end-of-stroke deceleration to soften hard mechanical stops, extending seal life in high-cycle applications.
| Model | Airtac SE40 Standard Cylinder SE40X150S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 628 N push needed to consistently fold corrugated cardboard flaps on high-speed case sealing lines without stalling.
Uses the 150 mm stroke to actuate a routing flap on a logistics conveyor, diverting parcels into secondary sorting lanes.
Drives the sliding safety door of an enclosed CNC lathe, relying on the -S magnet and DMSE sensors to confirm door closure.
This 40 mm bore provides 628 N push at 0.5 MPa. If your load requires less force, stepping down to the 32 mm bore yields 402 N push; if you need more thrust, stepping up to the 50 mm bore provides 982 N push. Keep in mind that a standard SE cylinder relies on live air pressure to hold its position and will drift if air is lost or the valve centers, so a BSE rod lock is necessary for failsafe holding.
With a 150 mm stroke, the 16 mm rod and M12x1.25 thread handle moderate side loads, but long unsupported strokes can induce rod-bearing bending. For heavy offset loads, use an external guide rail to prevent premature wear. The standardized ISO 15552 mounting interface means you can reuse existing mounting hardware like FA front flanges or LB foot brackets when retrofitting.
Quick checklist
At 0.5 MPa, the push force is 628 N and the pull force is 528 N. At 0.7 MPa, the push force increases to 879 N. The maximum push force is 128 kgf at 1.0 MPa.
Yes. The SE40X150S is dimensionally interchangeable per ISO 15552, serving as a direct replacement for other ISO 15552 profile cylinders. It uses a PT1/4 port and shares standard mounting footprint dimensions.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.