
The AirTAC SE40 Standard Cylinder SE40X155S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 155mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X155S is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver 628 N of push force and 528 N of pull force at 0.5 MPa. Driven by a 16 mm hard-chrome rod with an M12x1.25 thread, it operates at speeds between 30 and 800 mm/s via a PT1/4 port. Because it uses a square extruded aluminum barrel without external tie rods, the body is inherently corrosion-resistant and mounts flush against machine frames, saving valuable space in compact assemblies.
This 155 mm stroke unit includes a built-in magnet (-S) designed to interface seamlessly with AirTAC CMSE reed and DMSE electronic sensors for precise end-of-travel detection. The profile features sensor grooves on three sides, allowing flexible switch placement. At both stroke ends, field-adjustable pneumatic cushioning allows you to tune the deceleration via a screw, softening hard mechanical stops during high-speed cycling.
| Model | Airtac SE40 Standard Cylinder SE40X155S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 155 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×155 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives the mechanical arms that fold cardboard flaps on high-speed packaging lines, utilizing the 628 N push force and 155 mm stroke to cleanly close cartons before sealing.
Pneumatically actuates routing gates to sort glass or PET bottles between parallel conveyor lanes, relying on the -S magnet and DMSE sensors to confirm gate position.
Positions the backstop finger on a sheet metal press brake, where the adjustable end cushions absorb kinetic energy during rapid positioning moves.
When sizing this 40 mm bore actuator, evaluate your exact force requirements: if 628 N of push at 0.5 MPa is insufficient, step up to the 50 mm bore (982 N push), or if you need a lighter touch, step down to the 32 mm bore (402 N push). To replace an existing ISO 15552 cylinder, match the 40 mm bore, 155 mm stroke, PT1/4 port, and mounting accessory. Note that a plain SE cylinder does not hold a load when air is exhausted; if your process requires position holding without live pressure, consider the BSE rod lock variant. For this 155 mm stroke, side loads remain manageable, but long unsupported strokes demand an external guide to prevent rod-bearing bending.
Quick checklist
At 0.5 MPa, the SE40X155S provides 628 N of push force and 528 N of pull force. At 0.7 MPa, the push force is 879 N. The maximum allowable push force is 128 kgf at 1.0 MPa.
Yes, the SE40X155S is dimensionally interchangeable per ISO 15552 standards. You can drop it in as a replacement for other ISO 15552 cylinders by matching the 40 mm bore, 155 mm stroke, PT1/4 port, and your specific mounting hardware.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.