
The AirTAC SE40 Standard Cylinder SE40X170 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 170mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X170 is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver 628 N of push force at 0.5 MPa over a 170 mm stroke. Its extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while exposing no vulnerable hardware.
This model features field-adjustable pneumatic cushioning at both ends to soften end-of-stroke impacts, operating at speeds from 30-800 mm/s. Note that this specific SKU is configured without a piston magnet, meaning it will not directly interface with AirTAC CMSE or DMSE position sensors without modification.
| Model | Airtac SE40 Standard Cylinder SE40X170 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 170 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×170 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Actuates a routing diverter on an SMT line, using its 628 N push force and 170 mm stroke to cleanly redirect PCB panels into inspection stations.
Drives the mechanical arms on a case erector, folding corrugated side flaps at high speed while relying on the adjustable cushions to prevent harsh slamming.
Positions a fluid dispensing nozzle over multi-well microplates, taking advantage of the smooth extruded profile to allow easy flush mounting on stainless steel frames.
Selecting the SE40X170 makes sense when an application requires roughly 628 N of push force at 0.5 MPa. If your load is lighter, stepping down to the 32 mm bore yields 402 N of push; if you need more muscle, stepping up to the 50 mm bore provides 982 N. Because this is a standard 170 mm stroke, it serves as a direct, dimensionally interchangeable direct replacement for any ISO 15552 cylinder with a 40 mm bore, 170 mm stroke, and PT1/4 port.
Since the 170 mm stroke is relatively short, side-load stress on the M12x1.25 rod thread is minimal, though external guides are always recommended for rigid loads. Remember that the adjustable air cushion only decelerates the piston near the stroke ends; it is not a locking device. If your process requires the load to be held mechanically in place without constant air pressure, you must integrate an external rod lock like the BSE series.
Quick checklist
At 0.5 MPa, the SE40X170 provides 628 N of push force and 528 N of pull force. At 0.7 MPa, the push force increases to 879 N, with a maximum push capacity of 128 kgf at 1.0 MPa. The operating speed ranges from 30-800 mm/s.
Yes, the SE40X170 is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact same mounting footprint, PT1/4 port size, and M12x1.25 rod thread as other 40x170 cylinders. However, note that this specific SKU lacks a piston magnet, so it will not trigger reed or electronic sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.