
The AirTAC SE40 Standard Cylinder SE40X215S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 215mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X215S is a double-acting single-rod ISO 15552 profile cylinder engineered for demanding pneumatic tasks. It features a 40mm bore and a 215mm stroke, delivering a robust 628 N push force at 0.5 MPa. The extruded aluminum barrel design omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush within tight machinery frames.
Equipped with a built-in magnet (-S), this unit seamlessly interfaces with AirTAC CMSE reed and DMSE electronic sensors for precise end-position detection. Field-adjustable air cushioning at both ends allows technicians to tune deceleration and soften hard end stops dynamically, ensuring smooth operation across its 30-800 mm/s speed range.
| Model | Airtac SE40 Standard Cylinder SE40X215S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 215 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×215 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Gates and diverts PET bottles on a high-speed packaging conveyor, utilizing the 215mm stroke and 628 N push force to shift product lanes reliably.
Opens and closes heavy safety sliding doors on CNC lathes, where the flush profile barrel and built-in DMSE sensor magnet ensure compact, position-verified automation.
Pushes populated printed circuit boards out of an assembly fixture, benefiting from the field-adjustable pneumatic cushioning to prevent impact damage at high cycle rates.
When sizing this actuator, compare its 628 N push @0.5 MPa against adjacent bores: step down to a 32mm bore for 402 N, or up to a 50mm bore for 982 N if your payload demands more force. As a 215mm stroke exceeds the standard 200mm increment, it is supplied as a non-standard made-to-order configuration. Because the stroke exceeds 300mm is not met here, the 16mm rod handles side loads adequately, but an external guide remains advisable for heavy radial loads.
This SE profile cylinder provides a true ISO 15552 dimensional interchangeability, functioning as a direct replacement for other ISO 15552 cylinders without altering mounting hardware. Remember that the adjustable air cushion only decelerates the piston near stroke end; it is not a locking mechanism. If the application must hold a load without live pressure, integrate a BSE rod lock or external check valve.
Quick checklist
At 0.5 MPa, this 40mm bore cylinder provides 628 N push and 528 N pull force. At 0.7 MPa, the push force is 879 N, with a maximum push of 128 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE40X215S is dimensionally interchangeable per ISO 15552 standards, serving as a direct replacement for other ISO 15552 profile cylinders. It uses a PT1/4 port, an M12x1.25 rod thread, and includes a built-in magnet for CMSE/DMSE sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.