
The AirTAC SE40 Standard Cylinder SE40X240 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 240mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X240 is a double-acting single-rod ISO 15552 profile cylinder delivering 628 N of push force and 528 N of pull force at 0.5 MPa. It features a 40 mm bore, a 240 mm stroke, and a PT1/4 port. The extruded aluminum barrel design omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush in tight machine envelopes while retaining the standardized ISO 15552 footprint for seamless retrofitting.
This SKU is built without a position sensor magnet, but it retains field-adjustable pneumatic cushioning at both ends. You can tune the cushion screws to soften end-of-stroke impacts at speeds up to 800 mm/s, ensuring smooth deceleration rather than relying on fixed rubber bumpers.
| Model | Airtac SE40 Standard Cylinder SE40X240 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 240 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×240 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Actuates a pneumatic routing flap on a packaging conveyor, utilizing the 628 N push force at 0.5 MPa to smoothly redirect heavy cardboard boxes.
Drives the sliding safety door of an enclosed CNC lathe, where the compact tie-rod-free profile fits within the machine's narrow guarding.
Positions the film roll carriage up and down a stretch wrapper mast, relying on the 240 mm stroke and adjustable end cushions to prevent hard stopping.
Selecting this 40 mm bore provides 628 N of push at 0.5 MPa. If your assembly requires less force, stepping down to the 32 mm bore yields 402 N, while stepping up to the 50 mm bore provides 982 N. Because this is a standard 240 mm stroke, it serves as a direct, dimensionally interchangeable direct replacement for any ISO 15552 cylinder with matching bore, stroke, PT1/4 port, and mounting hardware. Note that a plain SE cylinder does not hold its position when air is exhausted; if your application must hold a load without live pressure, consider the BSE rod lock variant. Additionally, at 240 mm of travel, the 16 mm rod and rod-bearing bending should be evaluated for side loads, and an external guide should be used for unsupported loads.
Quick checklist
At 0.5 MPa, the SE40X240 delivers 628 N of push force and 528 N of pull force. At 0.7 MPa, the push force is 879 N, with a maximum push force of 128 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes. The SE40X240 is dimensionally interchangeable per ISO 15552 standards, meaning it shares the same mounting interface, PT1/4 port, 40 mm bore, and 240 mm stroke footprint as other ISO 15552 profile cylinders, allowing for a direct retrofit.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.