
The AirTAC SE40 Standard Cylinder SE40X310S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 310mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X310S is a double-acting single-rod profile cylinder built to the ISO 15552 standard. It features a 40 mm bore and generates 628 N of push force at 0.5 MPa, making it a solid choice for mid-range linear actuation. The extruded aluminum barrel lacks external tie rods, yielding a compact footprint that mounts flush against machine frames while resisting corrosion.
This specific unit includes a built-in magnet (-S) for position sensing via AirTAC CMSE reed or DMSE electronic switches. To protect the end caps during high-velocity cycling, the pneumatic cushioning at both ends is field-adjustable via a set screw, letting technicians dial in the exact deceleration needed for the 310 mm travel.
| Model | Airtac SE40 Standard Cylinder SE40X310S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 310 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×310 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Uses the 628 N push force and 310 mm stroke to push cartons cleanly between parallel conveyor belts without stalling the upstream flow.
Leverages the compact tie-rod-free profile and built-in -S magnet to trigger DMSE electronic sensors for safe machine guarding interlocks.
Relies on the adjustable pneumatic cushion to decelerate the 310 mm stroke smoothly, preventing harsh impacts when halting heavy pallets.
Selecting the SE40X310S bridges the gap between lighter and heavier actuators. If 628 N of push at 0.5 MPa is excessive for your payload, stepping down to the 32 mm bore yields 402 N. Conversely, if you need more authority, the 50 mm bore provides 982 N. Because this model carries a 310 mm stroke, the 16 mm rod and internal bearing face increased bending moments under side loads; for rigid guidance over this travel distance, always pair the cylinder with an external linear rail.
As a true ISO 15552 profile cylinder, this unit provides direct dimensional interchangeability for retrofitting existing ISO 15552 setups without altering mounting centers. It uses a PT1/4 port and accepts standard ISO mounting accessories. Note that while the adjustable air cushion softens end-of-stroke impacts, it is not a locking mechanism; the piston will drift if air pressure is lost or the valve is centered.
Quick checklist
At 0.5 MPa, this 40 mm bore cylinder provides 628 N of push force and 528 N of pull force. At 0.7 MPa, the push force increases to 879 N. The maximum push capacity is 128 kgf at 1.0 MPa, and the operational speed range is 30-800 mm/s.
Yes. The SE40X310S is dimensionally interchangeable per ISO 15552, meaning it shares the exact same mounting footprint and rod thread dimensions as other standard ISO 15552 profile cylinders, allowing for a direct retrofit.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.