
The AirTAC SE40 Standard Cylinder SE40X320 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 320mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X320 is a double-acting single-rod ISO 15552 profile cylinder delivering 628 N push at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact body that mounts flush and resists corrosion while providing sensor grooves on three sides. Because this specific SKU lacks the -S magnet code, it is configured for standard pneumatic drive duty without position sensing.
Field-adjustable air cushioning at both ends allows you to tune end-of-stroke deceleration via a set screw, softening hard mechanical impacts when cycling at speeds up to 800 mm/s. The 320 mm stroke moves meaningful distance while maintaining a 30 mm cushion length to absorb kinetic energy at the 16 mm rod limits.
| Model | Airtac SE40 Standard Cylinder SE40X320 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 320 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×320 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Uses the 320 mm stroke to push parcels cleanly across a 300 mm transfer belt, relying on the 628 N push force to overcome carton friction without bouncing.
Extends to fold cardboard blanks during automated box forming, where the adjustable cushion softens the impact at the end of the 320 mm travel.
Drives a linear carriage to deposit test tubes into processing racks, taking advantage of the smooth flush-mounted profile barrel in a compact benchtop frame.
When sizing this 40 mm bore, step down to a 32 mm cylinder for lighter loads (402 N push at 0.5 MPa) or step up to a 50 mm bore if your application exceeds 628 N (982 N push at 0.5 MPa). As a standard ISO 15552 profile cylinder, this unit is dimensionally interchangeable with other ISO 15552 cylinders, accepting standard mounting accessories like FA front flanges or LB foot brackets without interference.
Because the 320 mm stroke creates an extended lever arm, long unsupported loads will induce bending moments on the 16 mm rod and front bearing. An external guide rail should be used to prevent side-load wear. Note that a plain SE cylinder drifts when air is lost or the valve centers; if your machine must hold a vertical load without live pressure, integrate a BSE rod lock or external pilot check valve.
Quick checklist
At 0.5 MPa, the push force is 628 N and the pull force is 528 N. At 0.7 MPa, the push force is 879 N. The maximum push force is 128 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes. The SE40X320 is dimensionally interchangeable per ISO 15552, meaning it shares the exact same mounting footprint and port sizes (PT1/4) as other standard ISO 15552 profile cylinders, allowing a direct retrofit.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.