
The AirTAC SE40 Standard Cylinder SE40X360 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 360mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X360 is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver 628 N of push force at 0.5 MPa. Featuring a 40 mm bore and a 360 mm stroke, it operates at speeds from 30-800 mm/s using a PT1/4 port. The square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while resisting mechanical snagging.
This unit relies on field-adjustable pneumatic cushioning at both ends to decelerate the 16 mm hard-chrome rod over a 30 mm cushion length, preventing harsh end-stop impacts at high cycle speeds. Because this specific SKU lacks the -S magnet option, it does not support AirTAC CMSE or DMSE position sensors out of the box, requiring external detection if stroke confirmation is needed.
| Model | Airtac SE40 Standard Cylinder SE40X360 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 360 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×360 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Uses the 628 N push force at 0.5 MPa to deflect cartons onto secondary packaging lanes without stalling the main belt.
Cycles the 360 mm stroke to open and close heavy machine tool doors, relying on the adjustable cushion to soften end stops.
Shifts test tube racks between processing stations, taking advantage of the tie-rod-free profile to mount flush in tight lab cells.
When sizing this 40 mm bore, you can step down to a 32 mm bore for 402 N of push at 0.5 MPa, or move up to a 50 mm bore for 982 N of push at 0.5 MPa. As a standard double-acting cylinder, the SE40X360 does not hold its load when air is exhausted or the valve centers; the piston will drift, so a BSE rod lock or external pilot-operated check valve is required for fail-safe positioning. At 360 mm of stroke, the unsupported rod is susceptible to bending under lateral loads, so an external guide rail is strongly recommended to prevent premature rod-bearing wear. It serves as a dimensionally interchangeable direct replacement per ISO 15552 mounting interface standards, utilizing a PT1/4 port and basic mounting.
Quick checklist
The SE40X360 provides 628 N push and 528 N pull at 0.5 MPa, 879 N push at 0.7 MPa, and a maximum push of 128 kgf at 1.0 MPa. Its operational speed ranges from 30-800 mm/s.
Yes, the SE40X360 is dimensionally interchangeable with other ISO 15552 profile cylinders, matching standard footprint, port (PT1/4), and rod thread (M12x1.25) for easy retrofits.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.