
The AirTAC SE40 Standard Cylinder SE40X360S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 360mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X360S is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver 628 N of push force at 0.5 MPa and 879 N at 0.7 MPa. Its square extruded aluminum barrel entirely eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while resisting debris buildup.
This 40 mm bore unit features a built-in magnet (-S) for non-contact position sensing using AirTAC CMSE reed or DMSE electronic switches. The field-adjustable pneumatic cushioning at both ends allows precise tuning of end-of-stroke deceleration to absorb kinetic energy across the 360 mm travel.
| Model | Airtac SE40 Standard Cylinder SE40X360S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 360 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×360 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Ideal for routing lightweight pallets on 400mm centers, utilizing the 628 N push force to cleanly index products without overwhelming the lightweight extruded frame.
Folds corrugated carton flaps during automated erecting sequences, where the 360 mm stroke provides the reach needed for larger box formats.
Moves fluid dispensing heads across a testing zone, relying on the -S magnet and DMSE electronic sensors for precise position confirmation at high cycling rates.
Delivering 628 N push at 0.5 MPa, this 40 mm bore sits between the lighter SE32 (402 N push) and the heavier SE50 (982 N push) for scaling actuation force up or down. The PT1/4 port and M12x1.25 rod thread standardize your plumbing and clevis attachments. Because the stroke is 360 mm, the unsupported piston rod is prone to bending under lateral loads; always pair this cylinder with an external guide rail to prevent rod-bearing damage.
For direct retrofits, this profile cylinder is dimensionally interchangeable per ISO 15552, matching the mounting footprint of competing standard cylinders. Note that a standard SE does not hold position if air pressure is lost; if your process requires mid-stroke holding under load loss, consider the BSE rod lock variant.
Quick checklist
At 0.5 MPa, the SE40X360S generates 628 N of push force and 528 N of pull force. At 0.7 MPa, the push force increases to 879 N. The absolute maximum push force is 128 kgf at 1.0 MPa.
Yes, the SE40X360S is dimensionally interchangeable per ISO 15552, meaning it shares the exact mounting interface and hole pattern of other standard profile cylinders. You can reuse existing FA, FB, or LB mounting brackets without redrilling your frame.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.