
The AirTAC SE40 Standard Cylinder SE40X375 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 375mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X375 is a double-acting single-rod profile cylinder built to the ISO 15552 standard, delivering 628 N of push force at 0.5 MPa and a maximum thrust of 128 kgf. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while exposing standardized ISO 15552 mounting interfaces.
This specific SKU lacks the internal magnet suffix, meaning it is not wired for CMSE or DMSE electronic position sensing out of the box. To manage kinetic energy across the 375 mm stroke, the cylinder relies on field-adjustable pneumatic cushioning at both ends, allowing technicians to tune the end-of-stroke deceleration via a set screw rather than relying on fixed rubber bumpers.
| Model | Airtac SE40 Standard Cylinder SE40X375 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 375 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×375 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 628 N push stroke required to cleanly fold corrugated cardboard flaps on high-speed packaging lines without crushing the box structure.
Utilizes the 375 mm stroke to fully retract heavy safety enclosures on CNC lathes, benefiting from the compact tie-rod-free profile to save floor space.
Actuates the lower gate arms on automated pallet dispensers, where the adjustable end cushions prevent mechanical shock during rapid cycling.
When sizing this 40 mm bore, step down to the 32 mm version if you only need 402 N of push at 0.5 MPa, or step up to the 50 mm bore for 982 N if your payload demands more muscle. Because this 375 mm stroke creates a long lever arm on the 16 mm rod, external guide rails should be used to prevent rod-bearing bending under heavy side loads. As a standard ISO 15552 cylinder with a PT1/4 port, it serves as a direct dimensional direct replacement for other profile cylinders in retrofit applications.
Note that the adjustable air cushion only softens the end stops; it is not a holding brake. If your process requires the load to stay put when air pressure is removed or the valve is centered, you must integrate an external pilot-operated check valve or transition to a BSE rod-lock variant.
Quick checklist
At 0.5 MPa, this 40 mm bore cylinder outputs 628 N of push force and 528 N of pull force. At 0.7 MPa, the push force is 879 N, and the maximum push capacity is 128 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, it shares the exact ISO 15552 / VDMA 24562 mounting dimensions and PT1/4 porting, making it a direct replacement for other standard profile cylinders. However, this specific SE40X375 SKU does not have the -S magnet code, so it cannot host CMSE reed or DMSE electronic sensors without modifying the piston.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.