
The AirTAC SE40 Standard Cylinder SE40X375S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 375mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X375S is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver 628 N of push force at 0.5 MPa across a 375 mm stroke. Its square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while exposing no external hardware to snag or rust.
Because this unit carries the -S option, it features a built-in magnet ready for CMSE reed and DMSE electronic position sensing. The end caps integrate field-adjustable air cushioning at both ends, allowing technicians to dial in the exact deceleration needed to soften hard end stops at operating speeds up to 800 mm/s.
| Model | Airtac SE40 Standard Cylinder SE40X375S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 375 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×375 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Uses the 628 N push force and 375 mm stroke to deflect PET bottles between packaging lanes without stalling the main conveyor flow.
Leverages the -S magnet with DMSE sensors to confirm slide door open/closed positions, while the tie-rod-free profile mounts flush to the safety enclosure.
Relies on the field-adjustable end cushions to gently arrest the 800 mm/s rod velocity when folding heavy corrugated cardboard flaps at stroke end.
When sizing this 40 mm bore, you can step down to a 32 mm bore for 402 N push at 0.5 MPa to save space, or step up to a 50 mm bore for 982 N push if your payload demands more authority. This SE40X375S configuration uses a PT1/4 port, a 16 mm rod, and includes the -S magnet for CMSE/DMSE sensors, making it a dimensionally interchangeable direct replacement for any ISO 15552 footprint.
With a 375 mm stroke, the unsupported piston rod is highly susceptible to bending under lateral loads. To prevent premature rod-bearing wear, incorporate an external guide rail to carry the actual payload weight. Furthermore, remember that a standard SE cylinder will drift if air pressure is lost or a valve is centered; if your process requires true position holding, pivot to the BSE rod-lock variant.
Quick checklist
At 0.5 MPa, this 40 mm bore cylinder provides 628 N of push force and 528 N of pull force. At 0.7 MPa, the push force increases to 879 N, with a maximum push capacity of 128 kgf at 1.0 MPa. The operating speed range is 30-800 mm/s.
No. The adjustable air cushions at both ends only decelerate the piston near the stroke limits; they are not brakes. If air is exhausted or the valve is centered, the rod will drift. For true load holding, you need the BSE series rod lock or an external pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.