
The AirTAC SE40 Standard Cylinder SE40X45S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 45mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X45S is a double-acting single-rod profile cylinder built to the ISO 15552 standard, delivering 628 N of push force at 0.5 MPa. Its 45 mm stroke is a non-standard made-to-order length, providing exact motion control for compact machinery where a 50 mm travel would be excessive. The square extruded aluminum barrel omits external tie rods, yielding a flush body that resists corrosion and simplifies bracket mounting.
Equipped with a built-in magnet (-S), this unit supports AirTAC CMSE reed and DMSE electronic position sensors along its three integrated sensor grooves. Field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration, protecting the internal mechanics during rapid 30-800 mm/s cycling.
| Model | Airtac SE40 Standard Cylinder SE40X45S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 45 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Secures delicate printed circuit boards during routing with a precise 45 mm stroke, using the 628 N push force to hold panels firmly without flexing the substrate.
Cycles at high speeds to fold minor flaps on compact packaging lines, relying on the adjustable air cushion to prevent harsh impacts at the end of the short 45 mm travel.
Moves a metering valve into position for chemical dosing, utilizing the -S magnet and DMSE electronic sensors to confirm the exact 45 mm extension for repeatable fluid volumes.
Choosing this bore requires evaluating your load limits: the SE40X45S provides 628 N push at 0.5 MPa. If your application demands less force, stepping down to the 32 mm bore yields 402 N, while stepping up to the 50 mm bore provides 982 N. Because this 45 mm stroke is non-standard, expect a made-to-order lead time. As a dimensionally interchangeable ISO 15552 cylinder, it serves as a direct replacement for other ISO 15552 profile cylinders, utilizing the same PT1/4 ports and M12x1.25 rod-end threading.
Note that a plain double-acting cylinder drifts when air pressure is removed or exhausted, meaning the SE cannot hold a load safely without live pressure. If your fixture requires true load holding upon pressure loss, explore the BSE rod-lock variant or an external pilot-operated check valve.
AirtacDistr lists every SE40 order code with its price on one page at https://airtacdistr.com/products/airtac-se40-iso-air-cylinder
Quick checklist
At 0.5 MPa, this 40 mm bore cylinder provides 628 N of push force and 528 N of pull force. At 0.7 MPa, the push force increases to 879 N, with a maximum push capacity of 128 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE40X45S is dimensionally interchangeable per ISO 15552. You can drop it in as a replacement for other ISO 15552 profile cylinders using existing mounting hardware, matching the standard PT1/4 port and M12x1.25 rod thread.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.