
The AirTAC SE40 Standard Cylinder SE40X55 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 55mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X55 is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver 628 N of push force at 0.5 MPa. Its 55 mm stroke and 40 mm bore make it a compact, standardized choice for mid-range linear motion tasks. Because it features a square extruded aluminum barrel without external tie rods, the body is highly resistant to corrosion and mounts flush against machine frames, saving valuable space in tight assemblies.
This unit is equipped with field-adjustable air cushioning at both ends, allowing technicians to dial in end-of-stroke deceleration via a set screw to soften hard impacts at high cycling speeds. As configured, this specific SKU does not include a built-in magnet (-S), meaning it is not currently wired for AirTAC CMSE or DMSE electronic position sensing without modification.
| Model | Airtac SE40 Standard Cylinder SE40X55 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 55 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×55 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the precise 628 N push force and 55 mm stroke needed to tuck corrugated cardboard flaps on high-speed packaging lines before sealing.
Executes short-stroke 55 mm stamping and embossing operations on thin metal or plastic components using its 879 N push force at 0.7 MPa.
Acts as a rapid diverting gate on conveyor belts, using the 30 mm adjustable cushion to gently stop the 40 mm bore rod at the end of its 55 mm travel.
When sizing this 40 mm bore actuator, evaluate your force requirements carefully: it provides 628 N push at 0.5 MPa. If your application demands less energy, stepping down to a 32 mm bore yields 402 N of push force, whereas scaling up to a 50 mm bore provides a significantly higher 982 N of push force. Because the 55 mm stroke is relatively short, rod-bearing side-load bending is minimal, but always ensure the load is guided externally to prevent uneven wear.
For ISO 15552 retrofit projects, this cylinder is dimensionally interchangeable with other ISO 15552 profile cylinders, matching the 40 mm bore footprint, 55 mm stroke, and PT1/4 port. Remember that a standard SE cylinder relies on live air pressure to maintain its position; if air is lost or the valve is centered, the piston will drift. If your machine requires true position holding without constant air pressure, consider the AirTAC BSE rod-lock variant instead.
Quick checklist
At 0.5 MPa, the SE40X55 delivers 628 N of push force and 528 N of pull force. At 0.7 MPa, the push force increases to 879 N, with a maximum push capacity of 128 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE40X55 is dimensionally interchangeable per the ISO 15552 standard, meaning it shares the exact same mounting footprint, 40 mm bore dimensions, and PT1/4 port threads as equivalent profile cylinders from other manufacturers.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.