
The AirTAC SE40 Standard Cylinder SE40X55H is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 55mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X55H is a double-acting single-rod profile cylinder built to ISO 15552 dimensions, delivering a 628 N push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames.
This specific SKU utilizes a high-temperature FKM (Viton) seal, extending the operating range from -20 to +150 C for hot environments. It features field-adjustable air cushioning at both ends to soften end-of-stroke impacts, and because it lacks the -S magnet suffix, it does not natively support position sensing without modification.
| Model | Airtac SE40 Standard Cylinder SE40X55H |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 55 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×55 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Actuates a pressure roller on a packaging line where ambient heat from glue melters exceeds standard NBR temperature limits, utilizing the 150 C FKM seal.
Pushes formed plastic parts out of a heated mold cavity using 628 N of force at 0.5 MPa, with the 55 mm stroke providing rapid extraction.
Extends a deflector gate to route packaged goods into a heat-shrink tunnel, surviving radiant heat thanks to the Viton elastomer.
At 0.5 MPa this 40 mm bore generates 628 N of push force. If your application requires less force, stepping down to the 32 mm bore yields 402 N; if you need more clamping power, stepping up to the 50 mm bore provides 982 N. This cylinder uses a PT1/4 port and a 16 mm rod.
The FKM seal makes this specific unit ideal for high-heat applications up to 150 C. Keep in mind the adjustable air cushion only decelerates the piston near stroke end; it is not a locking device. If the machine loses air pressure, the load will drift, requiring an external rod lock or pilot-operated check valve for holding.
Quick checklist
This 40 mm bore cylinder provides a push force of 628 N and a pull force of 528 N at 0.5 MPa. At 0.7 MPa, the push force is 879 N, with a maximum push of 128 kgf at 1.0 MPa. Because it uses an FKM seal, it operates from -20 to +150 C.
Yes, it shares the exact ISO 15552 / VDMA 24562 mounting interface, allowing it to serve as a direct replacement for other standard profile cylinders. It uses a PT1/4 port and features adjustable air cushions at both ends to fine-tune deceleration.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.