
The AirTAC SE40 Standard Cylinder SE40X60 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 60mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X60 is a double-acting, single-rod ISO 15552 profile cylinder featuring a 40mm bore and 60mm stroke. It delivers a robust 628N push force at 0.5 MPa, making it well-suited for mid-range industrial actuation. The extruded aluminum barrel omits external tie rods, yielding a smooth, corrosion-resistant exterior that mounts flush against machine frames while leaving three integrated sensor grooves open for flexible switch placement.
This specific SKU is built without a magnet and operates via a PT1/4 port. To manage kinetic energy, the cylinder incorporates a field-adjustable air cushion at both ends, allowing technicians to dial in end-of-stroke deceleration via a set screw rather than relying on a fixed rubber bumper. It is a true VDMA 24562 profile body, ensuring dimensional interchangeability with other ISO 15552 cylinders for seamless retrofits.
| Model | Airtac SE40 Standard Cylinder SE40X60 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Driving the folding jaws on a continuous carton erector, where the 628N force cleanly creases and seals cardboard flaps at high cycling rates.
Actuating a pneumatic diverter arm to route small totes on a packaging conveyor, utilizing the 60mm stroke to clear the belt lane quickly.
Pushing machined aluminum parts out of an CNC fixture, relying on the smooth profile body to prevent swarf buildup and jamming.
If your assembly requires less energy, stepping down to the 32mm bore yields 402N of push at 0.5 MPa, whereas upgrading to the 50mm bore provides 982N for heavier loads. Because this 40mm bore generates 628N of thrust, it fits perfectly into medium-duty positioning tasks. Note that a standard SE cylinder will drift if air pressure is lost; if your mechanism must hold a vertical load safely during an outage, consider the BSE rod-lock variant. For ISO 15552 replacement matching, verify the 60mm stroke, PT1/4 port, and your required mounting accessory before finalizing the order.
Quick checklist
At 0.5 MPa, the SE40X60 exerts 628N of push force and 528N of pull force. At 0.7 MPa, the push force reaches 879N, with a maximum push capacity of 128 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes. The SE40X60 is dimensionally interchangeable per ISO 15552 / VDMA 24562 standards. You can drop it directly into existing mounting hardware, provided you match the 40mm bore, 60mm stroke, and PT1/4 porting.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.