
The AirTAC SE40 Standard Cylinder SE40X600SLB is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 600mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X600SLB is a double-acting, single-rod ISO 15552 profile cylinder engineered for demanding pneumatic tasks. Operating at 0.5 MPa, it generates 628 N of push force and 528 N of pull force, utilizing a 40 mm bore and a 600 mm stroke. The extruded aluminum barrel design omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machinery.
This specific configuration includes an LB foot mounting bracket for rigid base anchoring and a built-in S magnet for position sensing. The integrated magnet seamlessly interfaces with AirTAC CMSE reed and DMSE electronic switches, which drop directly into the sensor grooves on three sides of the barrel. Furthermore, field-adjustable pneumatic cushioning at both stroke ends allows technicians to fine-tune end-of-stroke deceleration, effectively softening hard impacts during high-speed 30-800 mm/s operation.
| Model | Airtac SE40 Standard Cylinder SE40X600SLB |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Ideal for routing PET bottles on a high-speed conveyor, where the 628 N push force reliably actuates 600 mm diverting arms without mechanical hesitation.
Provides robust 600 mm stroke extension to deploy physical stop gates at pallet accumulation zones, safely halting heavy goods in transit.
Delivers the precise 528 N pull force and long reach needed to pull corrugated carton erector jaws apart, readying packaging boards for product insertion.
When sizing this 40 mm bore actuator, consider stepping down to a 32 mm bore for lighter duties, which yields 402 N of push at 0.5 MPa, or moving up to a 50 mm bore to achieve 982 N of thrust for heavier loads. Because the 600 mm stroke creates a long unsupported piston rod span, external guiding is strongly recommended to prevent rod-bearing bending and premature seal wear under side loading.
This SE40X600SLB is dimensionally interchangeable per ISO 15552 standards, meaning it serves as a direct replacement for other ISO 15552 cylinders using identical bore, stroke, PT1/4 port, and LB mounting accessories. Note that while the adjustable air cushion decelerates the piston near stroke end, it does not hold the load; if air pressure is lost, the cylinder drifts. For position holding without live pressure, a BSE rod lock variant or external pilot-operated check valve is required.
Quick checklist
The SE40X600SLB generates a push force of 628 N and a pull force of 528 N at 0.5 MPa. At 0.7 MPa, the push force increases to 879 N, with a maximum push capacity of 128 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, as a true ISO 15552 profile cylinder, it is dimensionally interchangeable with other ISO 15552 cylinders. You can drop it into existing setups sharing the same 40 mm bore, 600 mm stroke, PT1/4 port, and LB foot mount footprint. The built-in S magnet also works directly with AirTAC CMSE and DMSE sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.