
The AirTAC SE40 Standard Cylinder SE40X60SH is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 60mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X60SH is a double-acting, single-rod ISO 15552 profile cylinder engineered for rigorous environments. It delivers 628 N of push force and 528 N of pull force at 0.5 MPa, utilizing a 40 mm bore and 60 mm stroke. Equipped from the factory with FKM (Viton) seals, this variant reliably operates in sustained temperatures up to 150 C, making it ideal for thermal processing lines.
Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames. The integrated -S magnet enables direct position tracking with AirTAC CMSE reed and DMSE electronic sensors fitted into the three-sided sensor grooves. Furthermore, the field-adjustable pneumatic cushioning at both stroke ends allows technicians to tune end-of-travel deceleration, preventing harsh mechanical impacts during high-speed cycling.
| Model | Airtac SE40 Standard Cylinder SE40X60SH |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Handles hot plastic part ejection where the 150 C FKM seal survives ambient radiant heat, and the 628 N push force reliably strips parts from mold cores.
Actuates sorting gates on high-temperature food conveyor lines, using its 60 mm stroke and Viton seals to withstand warm oven exhaust without degrading.
Drives upper sealing jaws on continuous flow wrappers, applying 528 N of retract pull force at 0.5 MPa while resisting thermal degradation near heated sealing bars.
When sizing this 40 mm bore cylinder, evaluate your dynamic load against its 628 N push at 0.5 MPa. If your application demands less force, stepping down to the 32 mm bore yields 402 N of push, whereas upgrading to the 50 mm bore provides 982 N for heavier payloads. Because this is a double-acting actuator, it will drift and cannot hold a load if air supply is lost or the directional valve is centered; for position-holding safety, consider an AirTAC BSE rod lock variant. To execute a true ISO 15552 dimensional retrofit, match the 60 mm stroke, PT1/4 port, and the required mounting accessory. The 16 mm rod and M12x1.25 thread provide robust load transmission, but for any stroke over 300 mm, always incorporate an external guide to prevent rod-bearing bending under lateral stress.
Quick checklist
This 40 mm bore cylinder provides 628 N push and 528 N pull at 0.5 MPa, 879 N push at 0.7 MPa, and a maximum push of 128 kgf at 1.0 MPa. It operates at speeds of 30-800 mm/s, with a proof pressure of 1.5 MPa.
Yes. The SE40X60SH is dimensionally interchangeable per ISO 15552 / VDMA 24562 standards, meaning it serves as a direct replacement sharing the same mounting footprint and PT1/4 port locations without requiring frame modifications.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.