
The AirTAC SE40 Standard Cylinder SE40X65S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 65mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X65S is a double-acting single-rod profile cylinder built to ISO 15552 dimensions, delivering 628 N of push force at 0.5 MPa. Its 65 mm stroke is a non-standard made-to-order length, providing exact travel for specialized machine movements without requiring mechanical spacers.
The extruded aluminum barrel omits external tie rods, yielding a smooth, compact body that mounts flush against frames and resists corrosion. Equipped with a built-in magnet (S option), this unit supports AirTAC CMSE reed and DMSE electronic sensors for precise end-position detection.
| Model | Airtac SE40 Standard Cylinder SE40X65S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 65 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×65 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Cycles a safety gate on a PCB drilling station, using the 65 mm stroke to clear the spindle path while the magnet triggers a DMSE sensor to confirm safe closure.
Folds small corrugated carton flaps on a packaging line, where the 628 N push force easily overcomes board stiffness without crushing the product.
Raises and lowers a fluid dispensing nozzle in a laboratory automation rig, utilizing the smooth profile barrel for easy washdown and compact mounting.
This 40 mm bore generates 628 N push at 0.5 MPa. If your application requires less force, stepping down to the 32 mm bore yields 402 N push; if you need more power, the 50 mm bore provides 982 N push. Because the 65 mm stroke is a non-standard length, expect a made-to-order lead time. The field-adjustable air cushion at both ends lets you tune end-of-stroke deceleration to prevent hard impacts, but remember it is not a locking device—the piston will drift if air pressure is lost. For position holding, consider a BSE rod lock variant.
Quick checklist
At 0.5 MPa, the 40 mm bore provides 628 N push and 528 N pull force. At 0.7 MPa, push increases to 879 N. The maximum push force is 128 kgf at 1.0 MPa. It features a PT1/4 port, a 16 mm rod, and operates at speeds of 30-800 mm/s.
Yes, the SE40X65S is dimensionally interchangeable per ISO 15552 standards. You can drop it into existing foot, flange, or trunnion mounting hardware. The built-in magnet also allows you to use AirTAC CMSE or DMSE sensors for position feedback.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.