
The AirTAC SE40 Standard Cylinder SE40X95 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 95mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X95 is a double-acting, single-rod ISO 15552 profile cylinder featuring a 40 mm bore and a 95 mm stroke. It delivers a robust 628 N of push force at 0.5 MPa, making it well-suited for mid-range industrial actuation where space is tight but power cannot be compromised. The square extruded aluminum barrel omits external tie rods, yielding a smooth, flush exterior that resists contamination and simplifies mounting on machinery frames.
This model incorporates field-adjustable pneumatic cushioning at both ends, allowing technicians to fine-tune end-of-stroke deceleration via a set screw—preventing harsh impacts during high-speed operations. Because this specific SKU lacks the built-in magnet option, it does not support direct position sensing; if your workflow requires confirmation of end-of-stroke, you would look toward an -S coded variant compatible with CMSE reed or DMSE electronic sensors.
| Model | Airtac SE40 Standard Cylinder SE40X95 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 95 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×95 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives the folding jaws on automated packaging lines, utilizing the 628 N push force to reliably form and square corrugated carton blanks at high cycle rates.
Actuates a routing diverter on a conveyor system, where the 95 mm stroke provides the precise linear throw needed to push heavy pallets onto secondary transfer tracks.
Shifts the weft guide mechanism on industrial weaving machinery, leveraging the smooth no-tie-rod profile to prevent thread snagging during rapid oscillating movements.
When sizing this actuator, stepping down to a 32 mm bore reduces the 0.5 MPa push force to 402 N, whereas moving up to a 50 mm bore increases it to 982 N, giving you clear boundaries for load adjustment. As a true ISO 15552 cylinder, the SE40X95 is dimensionally interchangeable with other standard profile cylinders, meaning it serves as a direct replacement for existing ISO 15552 hardware without requiring custom mounting brackets. Remember that the adjustable air cushion only decelerates the piston near stroke end; it does not hold the load if air pressure is lost or the valve is centered. For any application requiring position holding without live pressure, consider the BSE rod lock variant.
Quick checklist
The SE40X95 features a 40 mm bore and a PT1/4 port. It generates 628 N of push force and 528 N of pull force at 0.5 MPa, 879 N of push force at 0.7 MPa, and a maximum push force of 128 kgf at 1.0 MPa.
Yes, the SE40X95 is dimensionally interchangeable per the ISO 15552 standard, allowing it to direct replace other standard profile cylinders using the same mounting interface without custom bracket modifications.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.