
The AirTAC SE50 Standard Cylinder SE50AX55S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 55mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50AX55S is a double-acting, single-rod ISO 15552 profile cylinder engineered for demanding environments. It features a 50 mm bore and a 55 mm stroke, generating 982 N of push force at 0.5 MPa and up to 1374 N at 0.7 MPa. The square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames.
This specific configuration includes a SUS420J2 stainless steel rod (code A) for superior resistance to washdowns and corrosive atmospheres. Equipped with a built-in magnet (code S), the cylinder seamlessly integrates with AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection. Field-adjustable pneumatic cushioning at both ends allows you to fine-tune deceleration and soften hard end stops dynamically.
| Model | Airtac SE50 Standard Cylinder SE50AX55S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 55 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×55 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Actuates a 55 mm stroke diverter gate on a food packaging line, utilizing the 982 N push force and SUS420J2 stainless rod to withstand daily washdowns.
Handles high-speed lane sorting for PET bottles, relying on the built-in S magnet and DMSE electronic sensors to confirm gate closure at 30-800 mm/s.
Ejects processed fluid samples from a testing carousel, using the compact tie-rod-free profile to fit within tight analytical equipment enclosures.
When sizing this actuator, compare its 982 N push at 0.5 MPa against your actual load requirements. Stepping down to a 40 mm bore reduces output to 628 N, while moving up to a 63 mm bore increases thrust to 1559 N. Because the SE50AX55S is dimensionally interchangeable per ISO 15552, it serves as a direct replacement for other standard profile cylinders without altering mounting patterns. Its PT1/4 port and M16x1.5 rod thread accommodate standard pneumatic fittings.
Remember that a standard SE cylinder does not hold a load if air pressure is lost or the valve is centered; the piston will drift. For applications requiring position holding without live air, consider the BSE rod-lock variant. At a 55 mm stroke, side-load bending moments are minimal, but always ensure the load is guided externally to prevent rod-bearing wear.
Quick checklist
At 0.5 MPa, this 50 mm bore cylinder provides 982 N of push force and 825 N of pull force. At 0.7 MPa, push increases to 1374 N, with a maximum rated push of 200 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes. The SE50AX55S is dimensionally interchangeable per ISO 15552 and shares the standardized mounting interface. You can drop it in for other ISO 15552 profile cylinders using the same FA, LB, or TC mounting hardware and PT1/4 ports.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.