verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE50 Standard Cylinder SE50AX900

The AirTAC SE50 Standard Cylinder SE50AX900 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 900mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke900 mm
  • Port sizePT1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$251.68 $259.18Save 2% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SE50 stroke, mounting and version on one page All SE50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SE50 Standard Cylinder SE50AX900

The AirTAC SE50AX900 is a double-acting single-rod profile cylinder built to the ISO 15552 standard, delivering a 982 N push at 0.5 MPa over a 900 mm stroke. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames. This specific SKU utilizes a SUS420J2 stainless steel piston rod (code A), making it highly suitable for corrosive environments or washdown duty where a standard carbon steel rod would fail.

Field-adjustable pneumatic cushioning at both ends allows technicians to tune the end-of-stroke deceleration via a set screw, softening hard impacts when moving loads at speeds up to 800 mm/s. Because this model lacks the -S magnet suffix, it does not support direct CMSE or DMSE position sensing without modification. The cylinder operates on filtered air at 0.15-1.0 MPa and uses a PT1/4 port paired with a 20 mm diameter rod and M16x1.5 thread.

Airtac SE50 Standard Cylinder SE50AX900 Technical Specifications

ModelAirtac SE50 Standard Cylinder SE50AX900
SeriesSE ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke900 mm
Acting typeDouble acting
Port sizePT1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa982 N825 N
0.7 MPa1374 N—
Max (@1.0 MPa)200 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE50 Standard Cylinder SE50AX900

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
50Bore size in mm.
×900Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE50 Standard Cylinder SE50AX900 Is Used

conveyor_belt

Bottling Line Diverter

Routes plastic bottles on a washdown conveyor using the 982 N push force, where the SUS420J2 stainless rod withstands periodic chemical spray.

warehouse

Palletizing Push-Off

Utilizes the full 900 mm stroke to push completed cartons off a roller bed, relying on adjustable cushioning to soften the end stop at high traverse speeds.

packaging

Film Roll Ejection

Ejects heavy packaging film rolls from a winding mandrel, taking advantage of the 825 N retract force to safely extract the rod over the long 900 mm extension.

Is the Airtac SE50 Standard Cylinder SE50AX900 the Right Cylinder?

When sizing this 50 mm bore, stepping down to a 40 mm bore reduces the 0.5 MPa push to 628 N, while stepping up to a 63 mm bore increases it to 1559 N. This SE50AX900 provides a 900 mm stroke, which approaches the upper limit of the 50 mm standard range. At this extended length, the unsupported 20 mm rod is highly susceptible to bending under side loads; an external guide mechanism is strongly recommended to prevent rod-bearing damage and premature seal wear.

For direct retrofits, this cylinder is dimensionally interchangeable with any ISO 15552 profile cylinder matching the 50 mm bore and 900 mm stroke footprint. Note that a plain SE cylinder drifts when air pressure is lost or the valve is centered—it cannot hold a load. If your application requires positive position holding without live pressure, consider the BSE rod-lock variant instead.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE50 Standard Cylinder SE50AX900 FAQ

At 0.5 MPa, this 50 mm bore cylinder provides 982 N of push force and 825 N of pull force. At 0.7 MPa, the push force increases to 1374 N, with a maximum push capacity of 200 kgf at 1.0 MPa. The operating speed ranges from 30 to 800 mm/s.

Yes, the SE50AX900 is dimensionally interchangeable per ISO 15552 standards. It shares the exact mounting interface and 900 mm stroke footprint of other ISO 15552 profile cylinders, allowing it to serve as a direct replacement using existing mounting hardware.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE50 Standard Cylinder SE50AX900

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SE50AX900 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.