
The AirTAC SE50 Standard Cylinder SE50BX150N is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 150mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50BX150N is a double-acting single-rod profile cylinder built to ISO 15552 dimensions, delivering a 982 N push at 0.5 MPa. Its square extruded aluminum barrel omits external tie rods, yielding a compact footprint that mounts flush against machine frames while resisting corrosion.
This specific SKU specifies a SUS304 stainless steel rod and an NBR seal for reliable operation in washdown or mildly corrosive settings. It carries no built-in position magnet, so external end-of-stroke detection requires separate physical limit switches rather than AirTAC CMSE or DMSE rail sensors.
| Model | Airtac SE50 Standard Cylinder SE50BX150N |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives the horizontal sealing jaw on a continuous vertical form-fill-seal machine, using its 982 N thrust to cleanly press and heat-seal packaging films.
Actuates a routing flap on a stainless steel conveyor to sort filled beverage bottles, leveraging the SUS304 rod to endure frequent washdown cycles.
Positions the depth stop on a light-gauge sheet metal backgauge, utilizing its 150 mm stroke to set precise bend depths before the upper tool descends.
Select this 50 mm bore when an application requires roughly 1000 N of push force at 0.5 MPa. If you need less force, the 40 mm bore provides 628 N push; if your load demands more, step up to the 63 mm bore which provides 1559 N push. Because this is a plain cylinder, it cannot hold a load if air pressure drops—consider a BSE rod lock variant for fail-safe vertical positioning.
As a dimensionally interchangeable ISO 15552 cylinder with a PT1/4 port and 150 mm stroke, it serves as a direct replacement for other standard profile cylinders. The 150 mm stroke is well below the side-load threshold, so the Ø20 mm rod handles the extension without needing an external guide.
Quick checklist
At 0.5 MPa, this 50 mm bore cylinder outputs 982 N of push force and 825 N of pull force. At 0.7 MPa, the push force increases to 1374 N. The maximum drive force is 200 kgf when operated at the 1.0 MPa pressure limit.
No, this specific SKU does not include a built-in magnet. To detect piston position, you must use external physical switches, or select an SE variant with the -S option to utilize AirTAC CMSE reed or DMSE electronic sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.