Airtac SE50 Standard Cylinder SE50BX200SH
The AirTAC SE50 Standard Cylinder SE50BX200SH is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 200mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ50 mm
- Stroke200 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 30 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE50 Standard Cylinder SE50BX200SH
The AirTAC SE50BX200SH is a double-acting single-rod ISO 15552 profile cylinder engineered for demanding environments. It delivers a robust 982 N push force at 0.5 MPa (1374 N at 0.7 MPa) across its 200 mm stroke. Equipped with a SUS304 stainless steel rod and FKM Viton seals, this variant is built specifically for corrosive washdown areas and elevated temperatures up to 150 C.
Unlike traditional tie-rod cylinders, its extruded aluminum barrel lacks external protruding rods, yielding a compact, flush-mount profile that resists corrosion and simplifies sensor placement. The integrated -S magnet supports AirTAC CMSE reed and DMSE electronic position switches, while the field-adjustable pneumatic cushioning at both stroke ends allows you to tune end-of-stroke deceleration precisely for high-speed cycling.
Airtac SE50 Standard Cylinder SE50BX200SH Technical Specifications
| Model | Airtac SE50 Standard Cylinder SE50BX200SH |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE50 Standard Cylinder SE50BX200SH
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE50 Standard Cylinder SE50BX200SH Is Used
Bottle Filling Capper
Drives the capping head on a beverage line where washdown chemicals require the SUS304 rod, and the 982 N push force securely seals caps at 200 mm stroke.
Pouch Sealing Press
Actuates a heat-sealing bar in a packaging machine, leveraging the 150 C FKM Viton seals to withstand ambient radiant heat without degrading.
Food Grade Diverter
Pushes a routing gate on a stainless steel conveyor, utilizing the flush extruded profile and corrosion-resistant rod to meet strict hygiene standards.
Is the Airtac SE50 Standard Cylinder SE50BX200SH the Right Cylinder?
This 50 mm bore provides 982 N of push at 0.5 MPa. If your application requires less force, the 40 mm bore offers 628 N; if you need greater thrust, stepping up to the 63 mm bore yields 1559 N. Because the 200 mm stroke exceeds 300 mm, long unsupported piston rod travel invites bearing bending and side-load wear; always pair this cylinder with an external guide rail to prevent premature seal failure. As a dimensionally interchangeable ISO 15552 component, it serves as a direct replacement for other ISO 15552 profile cylinders using identical mounting accessories and PT1/4 ports. Note that the adjustable air cushion only decelerates the piston near stroke end; it does not hold the load if air pressure drops. For fail-safe position holding, consider the BSE rod lock variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE50 Standard Cylinder SE50BX200SH FAQ
The 50 mm bore provides 982 N push and 825 N pull at 0.5 MPa, 1374 N push at 0.7 MPa, and a maximum push of 200 kgf at 1.0 MPa. The pneumatic port size is PT1/4.
Yes, the SE50BX200SH is dimensionally interchangeable per ISO 15552 standards, meaning it shares identical mounting footprints and can serve as a direct replacement for other ISO 15552 profile cylinders. The integrated -S magnet also allows seamless switching with AirTAC CMSE reed or DMSE electronic sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE50 Standard Cylinder SE50BX200SH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.